Grab My Blinkie Here

blinkie

My TOU and Some Info

Just a note about
my tuts I dont tell
all my secrets lol
like how I do the
glow on a name etc.
I also have no
control over the
FTU supplies
I am sorry but
sometimes the
kits are for a
limited time free
or just disappear,
I will share
masks etc ONLY
if the tou of
the creator allows,
You can easily find
another mask or kit
to use in place of
what I have used
on my tuts, I write tuts
as I create a tag,

I hope you all
enjoy them and
I thank you
so much for
taking the time
to stop by my blog
smiles
christy
Ü

Would love to see your creations

I would LOVE to see
your creations you
can always email me
HERE
with a link or a tag
smiles
christy
Ü

Leave me a note

Proud Member

Followers

Sunday, February 28, 2010

My Flower Garden

7:35 PM | Edit Post
 
My Flower Garden 
 What you need : Tube of choice, I am using Suzanne Woolcott in my example Font of choice, I used Andy Scrap kit,
My Flower Garden by addicted 2 scraps
Graphic Program of choice, I use PSP 9

Open a new image 850x850
(I like to work on a large canvas you can always resize later)
flood fill with white.
Open el 103 copy and paste it as a new layer.
Move to the bottom center of your tag.
Open el 108 copy and paste as a new l
ayer move down to bottom center of your tag,
layer duplicate, duplicate once more and
arrange and move below your bench layer,
image mirror and move up a tiny bit.
Open el 101 copy and paste as a new layer,
layer arrange bring to top, image resize
(smartsize) 50% move to the right side of
the bench, open el 120 copy and paste
above the white layer, place where you
think it looks good. Open el 113 copy and
paste as a newlayer resize by 25%,
image rotate free rotate to the left by 77%.
move down to the bottom right of the tag.
Open el 117 and copy and paste as a new
layer, image resize by 40% arrange to your
liking. Open el 100 copy and paste as a new
layer resize by 24%place on your tag where
you like. Open el 77 copy and paste as a
new layer resize by 17% and place where
you like him I put it down in the grass to
the right lol, Open el 86 paste as a new layer
above your white layer, lower the opacity on the cloud
to about 60. Now open paper 1 , copy and paste as
a new layer above the white layer and resize by 67% .
Now apply a mask of choice
I used a circle mask. add your preferred
drop shadow to the elements you have added to your tag,
I did not add one to my top grasslayer but to the others
I did to try to give it a look of depth.
I used a subtle shadow on the tree 2, 2, 40, 12 color #ba86a8.
You can add any other elements that you like to your tag,

When you are satisfied, Hide your white background layer, and merge
visable. I then resized the tag layer by 80% bicubic,
Add your copyright information and name and save how you
usually save your tag
I hope you enjoyed this tut '
smiles
christy
Ü
Labels:, | 0 comments

My Gorgeous Friends Tut

2:38 PM | Edit Post

My Gorgeous Friends Tut

What you need : Tube of choice, I am using Suzanne Woolcott in example 1 Template used, Template 180 from Designs By Ali Font of choice, I used SnagglePuss a PTU font Scrap kit, Freebie kit by Sticky Kisses Designs, Made especially for My Gorjuss Friends Forum (my Forum!) Thank you Natasha!! Graphic Program of choice, I use PSP 9 Open template duplicate and close the original, I flood fill the copyright layer turn the opacity up to 100% and then send it to the bottom. Resize image by 85% smartsize all layers ticked. I deleted the 2 string layers and the dots layer on my tag. Select raster layer 2 (the blue rectangle) select all float defloat, selections invert, Open SKD paper one copy and paste as a new layerimage resize by 62% hit delete, select none and then delete raster layer 2. Select raster layer 3 (top circle on the template) select all float, defloat, selections invert, Open SKD paper7 copy and paste, image resize by 62% hit delete select none, delete the layer below,Repeat with the other circle layers, I used SKD paper 4 and SKD paper 5, Open SKD doodle 3 copy and paste it image resize by 62% and move this layer right above your white layer, duplicate image flip image mirror, You can use my tag as an example of where I placed the doodles, Now go to layer 9 (the big start) select all float defloat selections invert, Open SKD paper2 copy and paste as a new layer, image resize by 62% hit delete select none, delete the star layerDo the same thing on the other star layers, I used SKD Paper3 on the other 2 stars. I merged the frame layers together and then the frame background layers together, once you merge the background layers together select all float defloat selections invert copy and paste SKD Paper4 resize by 62 % hit delete. now you can add tube of choice (leaving your background layer selected ) place tubes and hit delete so not to have any outside your frame layer.now add a drop shadow of choice to all layers except the doodle layer. I use lokas 3d shadow, but psp drop shadow works JUST as well once you are happy hide your white background layer and merge visable, add your copyright info and name and save I hope you enjoyed this tut smiles christy Ü

Labels:,, | 1 comments
Saturday, February 27, 2010

Shades of Pink

4:58 PM | Edit Post
Shades Of Pink What you need : Tube of choice, I used artwork by Elias Chatzoudis, you can purchase a his art at My PSP tubes
Template used, Pookers template 14 you can find HERE This uses no scraps just filters in psp
Font of choice, I used dumbass
Graphic Program of choice, I use PSP 9
Let's Begin!
1. open pookers template, duplicate and close the original, canvas resize 750 x 600
delete the copyright layer, and fill the white layer, ( I like to start large to have plenty of room to work you can always crop and resize later)
2. select ractangle 1 layer, select all float defloat (I add a new layer on template tags)
add a new layer and flood fill with a color that compliments your tube. select none
delete the rectangle 1 layer.
3. Select rectangle 2 layer and repeat, as above using colors that compliment your tube.
4. Select rectangle 3 layer and repeat, this time leave selected, copy and paste your tube
and go selections invert and delete the excess tube off the rectangle. now go up to layer and
change the blend mode of your tube to luminance (L) add a drop shadow of -2, -2. 50, 5. (to make the shadow look correct take your magic wand and click outside the rectangle on the rectangle layer go back to the tube layer and hit delete.
5. select sandollar 1 layer repeat the same steps as you did on the other rectangle layers
6. same as above but select sandollar 2 layer . I duplicated both my sandollar layers and did image flip, image mirror so that I now have 2 on each side of my tag.
7. select your rectangle layer 1 (the first layer you worked on) select all float defloat, effects , texture effects, weave, with these settings......... 2, 6, 1, I used black and black with fill gaps checked, But again use a color that will compliment your tag
select none.
8. Select your rectangle layer 2 and repeat the same step above.
9. Now you can add a drop shadow of choice to your rectangle layers. I added another tube to my tag, this is your choice as this is just a guide, Now go to the white layer and add a new layer, fill with a color that compliments your tag, and apply a mask of choice, I used, Artmama's mask 06 you can find that HERE
10. when you have your tag the way you like it hide your white background layer and merge visable, Now add your copyright information, and your name and save. Hope you enjoyed my 2nd tut.
smiles
christy
Ü
Another example below made with a Gorjuss Tube which you can find HERE
Labels:,, | 0 comments

2 Peas Tut

12:41 PM | Edit Post
This is my very first tut ever, so be gentle please
2 Peas Tut
Image and video hosting by TinyPic
This tutorial assumes you have working knowledge of paint shop pro
I use version 9
plugins used are
xenofex 1.01
eyecandy 4000
lokas 3d drop shadow (psp dropshadow works just as well) This tag was made using the wonderful Collab kit Peas in a pod by Gemini Creationz and Sticky Kisses Designs you can find this kit at Scrappin Bratz
Open a new image 650x650 You can resize later,
I like having a large canvas to work on fill with white
Open gcz doodle 1 copy and paste as a new layer
resize 85% I use smartsize
Open gcz doodle 2 copy and paste as a new layer
resize 85% . line up the two to look like a heart
layer merge down.
select magic wand tolerance set to 0 sample merged ticked and contigous ticked
no feather anti alias ticked, click inside your heart frame you made, go selections
modify expand by 8. Go to your white layer add a new raster layer and fill with a light
blue. Keep selected, go xenofex 1.01 little fluffy clouds, add clouds to your liking
still keeping this selected open gcz grass element
copy and paste as a new layer above you blue background, resize 55% smart size,
selections invert hit delete, repeat this 3 or 4 times moving your grass around until you have
the desired amount (you can resize it a little smaller or a little larger) keeping selected still
Open gcz tree element, copy and paste as a new layer, resize 48% move to the right of the
blue back, hit delete if any is showing outside your frame, paste again, and resize 38% this time
and move to the left of your tag and down a bit (use my tag as an example)
now open gcz-baby2 element copy and paste it right below your frame layer resize it by 37% and place where you feel it should be. (you should still have a selection active)
make sure you hit delete if there is anything showing outside your frame, now you can deselect.
Now on your frame layer I do a gradient glow with these settings
Image and video hosting by TinyPic
I apply this twice now lokas dropshadow with these settings
Image and video hosting by TinyPic
If you use psp dropshadow the settings would be 2, 2, 50 , 5 , black
Now go to your tree's, pea people, and grass layers and add the same dropshadow as above
Hid your white background and merge visable.
unhide the white background and open paper gcz-4 copy and paste below your merged layer, resize to 70%
layer load mask from disc, you can use a mask of choice or the one I used
was boundlessbliss_grungemask_1 (I am not 100% sure where I got this mask)
Now above the mask layer open element gzc_gsplat copy and paste as a new layer
Move up and a bit to the right, layer duplicate, image flip, image mirror , and place where you think
it looks best (again you can use my tag as a guide)
Open element gcz-sun copy and paste it above your tag layer, resize by around 48% and move to the upper
right of your tag, add the same gradient glow as above ( 2 times) and the same drop shadow as well,
Now open element gcz-butterfly, copy and paste as a new layer, image resize by 40% Place where you feel it looks best and add a drop shadow. ( I rotated mine by 12% to the right ) .
Hide your white background layer and merge visable. Add the correct copyright information to your tag and your name and Save your tag .
If you would like to know how I did the effects on the name, I used font Montelago Flaire ( this is a ptu font)
size 150 with a stroke width of 1.5 black and fill color #6ccf37 add your name, using vector, before converting to raster image rotate free rotate to the left by 8, convert to raster selections select all float defloat, modify contract by 2, effects , texture effects , weave, settings 1, 4, 1, color black in both boxes, fill gaps, keep selected, efects inner bevel with these settings, width 11, smoothness 27, depthe 5, ambience, 4
shininess 0, angle 326 , intensity 28, elevation 62. select none, apply gradient glow same settings as above 2 times and add a drop shadow
I hope you enjoyed my very first tutorial ever
smiles
christy
Ü
Labels:,, | 1 comments
Subscribe to: Posts (Atom)

Search

My License's

Suzanne Woolcott, TooshToosh, CILM, MPT, CDO, PTE, My Tag Art, My Tubed Art, Zindy Nielsen, PSP Tubes Emporium, Keith Garvey, PFD, I also enjoy FTU artist