Pieces of Me

Tube of choice or image, I used Stacey Sharp and Sugargrl14
Supplies by x-clusively christy scraps (download HERE)
Font of choice I used Cherish
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 850x850 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

Unzip the Supplies, now add a new layer
grab a color from your tube of choice, fill
with this color and apply a mask of choice,
I used 210Insatiable Dreams

Now open the frame I supplied, c/p as a new layer,
depending on if you are using an image or a tube you will
select the inside of the frame openings and expand by
9 and add a new layer and fill with a complimentry color
to the tube, or c/p the image of choice, invert your selection
and hit delete if you are using an image, select none,
now open the ribbon from the supplies, c/p as a new
layer right above the mask layer, resize by 90% now
open the leaves I supplied c/p as a new layer, resize by
80% now mirror and then rotate to the right by 45%
I duplicated mine and then flipped it, I place both on
the left of the frame, now lets open the flower I supplied
c/p as a new layer and resize by 90% I again duplicated
and flipped this, placing with the leaves, Now lets open
the swirl I supplied c/p as a new layer bring this to the top
and resize by 90% place towards the bottom left of the
frame, now open the dots from the supplies, c/p as a new
layer, resize by 70% place near your swirl, I duplicated mine
and then rotated to the left by 55% placing this towards
the right of the frame, now open the word art I supplied
(or use your own) and c/p as a new layer, when you are
happy with your tag add a dropshadow of choice, hide
the white background layer and merge visible, On the
Stacey sharp example I used penta dot and cross on
the filled background,

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Super Hero/Super Villain

Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

Open pd-pp-11 c/p as a new layer and apply a mask of choice,
I used LT mask 029

Now lets open pd-frame-02 and c/p as a new layer,resize by 90%
now grab your magic wand and click inside the frame opening, expand
by 9 and invert, open pd-pp-05 c/p as a new layer below the frame and
hit delete select none, Now open pd-cloud-03 c/p as a new layer, resize
by 105% I placed this layer on the top and erased part of it so it looks
like it circles the frame (I also used raster deform tool to stretch it a bit
and squish it a bit) Now open pd-wa-03 c/p as a new layer and resize
by 48% I added a small gradient glow to mine, Now open pd-light
c/p as a new layer, arrange to right above the paper fill layer,
resize by 85% I erased the part that is outside the frame, I
pasted it again and then mirrored it, and resize by 85% and then
rotated it to the left by 18% again erase the part showing outside
the frame, now open pd-glitter-02 c/p as a new layer place this
right above the mask layer and resize by 45% I placed one at
the top left and then duplicated and flipped and place the other
near the bottom right, Now open pd-hero-sign-01 c/p as a new
layer, resize by 65% and then rotate to the right by 18% place
near the top right of your frame, when you are happy with your
tag, add a dropshadow of choice and a tube of choice, hide
the white background layer and merge visible. In the Rion version
I used a different paper as my mask layer I used pd-pp-06
it matched the tube.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Machines

Tube of choice, I used Elias Chatzoudis and a Photo from MMFF
(Muscle Mustangs and Fast Fords)
Scrap used Machine by Pimp'd Designz
Font of choice I used aaaiightt!
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

Open pd-pp-04 c/p as a new layer and apply a mask of choice
I used a mask I have called image3-01 have NO idea where I
picked this one up, but any splotchy mask will work

Now lets open pd-frame-02 c/p as a new layer, resize by 90%
rotate to the left by 6% grab your magic wand and click inside
the frame opening, expand by 9 and then invert, open pd-pp-02
c/p as a new layer below the frame and hit delete, now open
pd-frame-05 c/p as a new layer and resize by 80% you will need
to use your free hand selection tool to draw around the frame
invert, Now depending on the tag you make, In one example
I am using a picture, you can just c/p this as a new layer below
your frame, if you are using a tube, add a paper of choice, and
hit delete, select none. Now open pd-wire-01 c/p as a new layer
place this between the top frame and bottom frame layers
resize by 90%, Now lets open pd-fence2 c/p as a new layer
arrange to right above the mask layer and move it up and
to the right a bit, Now open pd-splatter-02 c/p as a new layer
bring to the top and resize by 65%, now rotate to the left by 45%
now open pd-wire-02 c/p as a new layer, now lets open pd-nut
c/p as a new layer, arrange to your liking, I duplicated mine
and placed one in the top right corner of my frame and on
with the wire at the bottom of the frame, now open pd-screw
c/p as a new layer, rotate to the right by 10. Now open pd-wrench
c/p as a new layer and rotate to the right by 10% now on the
elias example I added pd-sign and resized it by 70% and then
rotated to the left by 6% add a dropshadow of choice to your
elements, the frame with the broken glass does not get a drop
shadow, hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



My Dark Side

Tube of choice, I used Elias Chatzoudis and Caron Vinson
Scrap used My Dark Side by Pimp'd Designz
Font of choice I used Water Brush
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd-pp-05 c/p as a new layer and apply a mask of
choice, I used 76 Kris, any good squarish mask would work
well

Now open pd-frame-02 c/p as a new layer, resize by
90% and then rotate to the left by 6% grab your magic
wand and click inside the frame opening, expand by 9
and invert, now open pd-pp-07 c/p as a new layer, below
the frame layer and resize by 80% arrange to your liking
and hit delete, select none. Now open pd-splatter-01 c/p as
a new layer, place so it lays on the frame some too
I resized mine by 80% I duplicated and flipped and then
mirrored this, not open pd-splatter-02 c/p as a new layer
resize by 65% and rotate to the left by 45% now flip this
and place near the top left of the frame. Now lets open
pd-ribbon-01 c/p as a new layer, now mirror and place
along the bottom of the frame, now open pd-ribbon-02
c/p as a new layer, resize by 75% place with your other
ribbon, now open pd-moon c/p as a new layer, arrange
to right above the mask layer, Now lets open pd-sparkle
c/p as a new layer place above the moon layer, move
towards the left placing the large sparkle at the top edge
of the frame, duplicate, mirror and flip, now rotate to the
left by 18% placing the big sparkle so you can see it near
the ribbons, now open pd-barb-wire c/p as a new layer
bring to right above the frame layer, resize by 75% and
rotate to the left by 6 arrange along the bottom of the frame
now open pd-feather c/p as a new layer place this below
your ribbon layers, and resize by 60%, now open pd-leaf-02
c/p as a new layer, arrange below your barbwire, resize by
60% I duplicated and flipped it, and duplicated again
arranging along the bottom of the frame a bit now lets
open pd-flower-02 c/p as a new layer resize by 60%
place in the center of your one ribbon loop, now open
pd-key c/p as a new layer, mirror and then resize by
48% and then rotate to the left by 18% when you are
happy with your tag add a dropshadow of choice, and
a tube of choice, hide the white background layer and
merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



The Green Fairy

Tube of choice, I used Elias Chatzoudis and Rion Vernon
Scrap used A Simple Day by Jaelop Designs
Font of choice I used Powderworks BBK and Andantino JF
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open JD paper 2 resize by 19% and c/p as a new layer add a mask
of choice, I used a mask I have that is called Image 3-1

Now lets open JD element 4 c/p as a new layer and resize by
36% and rotate to the left by 9% Now lets open JD element 5
c/p as a new layer resize by 36% now grab your magic wand
and click inside the frame opening expand by 9 and invert
open JD paper 1 resize by 19% and c/p as a new layer below
the top frame, hit delete and select none. Now open JD element 20
c/p as a new layer arrange to right above the mask layer and resize
by 35% Now open JD element 18 c/p as a new layer resize by 24%
Now open JD element 18c c/p as a new layer, mirror and resize
by 24% I rotated both to the left by 9% Now lets open JD element11a
c/p as a new layer, resize by 35% now open JD element 11 c/p
as a new layer and mirror, resize by 35%, I duplicated both flowers
and flipped and mirrored these, arrange to your liking, now open
JD element 17 c/p as a new layer and resize by 30% arrange below
the flower layers, now open JD element 15 c/p as a new layer and
resize by 35% arrange to your liking, when you are happy with your
tag add a dropshadow of choice, Some items have a dropshadow
already and a tube of choice, hide the white background layer
and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Happy Birthday and MANY More!

Tube of choice, I used Rion Vernon and Elias Chatzoudis
Scrap used And Many More by Pimp'd Designz
Font of choice I used O Whoa DNA for the WA and Delight Script for the names
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open pp11 c/p as a new layer and apply a mask of choice, I used
DDMask 10 I duplicated this and placed one up towards the left
and the other down and towards the right,

Now open frame-01 c/p as a new layer, grab your magic wand
and click inside the frame openings and expand by 9 and then
invert, open pp-07 c/p as a new layer below the frame layer
and hit delete, select none, Now lets open ribbon-01 c/p as a
new layer, I resized this by 102 and then used my raster deform
tool to make it look like it wraps both frames, Now lets open
the button, c/p as a new layer and resize by 60% 2 times place
it in the center of your bow, Now open the flower-01 c/p as a new
layer, arrange this so it is right above your mask layers, resize by
60% Now open flower-02 c/p as a new layer and resize this by
60% mirror and place with your other flower, Now lets open
rope-butterfly, c/p as a new layer, bring this layer to the top and
resize by 45% Now paste again this time resize by 35% and mirror
it, I also rotated mine to the right by 12 and moved it to the upper
left of the frame, now open the gifts of choice from the kit, and
add those, I resized mine by 42% and used gift 2, 3, and 4
Now lets open latex-balloon02 c/p as a new layer, arrange this layer
to below your ribbon layer, resize by 65% I duplicated mine
and mirrored it, and then rotated it to the right by 9% I also
changed the color of the second balloon to match the green flower
You can do that by going to hue and saturation and using 0 and 0
then go to adjust color balance, and then manual color correction,
grab the dropper and grab the lightest color off the balloon, and then
change the bottom box to color of choice, Now lets open paper-heart
c/p as a new layer, bring to the top, resize by 65% two times, place
with your gifts, I duplicated and mirrored mine and then adjusted
the color on this one like I did the balloon above, now add a drop
shadow and tube or tubes of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



My Little Puppy

Tube of choice, I used Zindy Nielsen and Rion Vernon
Scrap used The Girls of PMTwS collab, PolkaDot Scraps part
Font of choice I used Dartangnon ITC
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open PDS_GPC-paper7 c/p as a new layer and apply a mask of
choice, I used DBV Mask 113

Now open PDS_GPC-frame5 c/p as a new layer, rotate to the
right by 6% grab your magic wand and click inside the frame
opening, expand by 9 and then invert, open PDS_GPC-paper6
c/p as a new layer below the frame and hit delete, select none
now open PDS_GPC-frame2 c/p as a new layer right above
the mask layer and then resize by 80% move towards the
left and up a bit, duplicate and place this one towards the bottom
right, I used gamma correction to lighten them just a bit,
open PDS_GPC-leaves3 c/p as a new layer, arrange to right
above the circle frame and resize by 80% move towards the
bottom right of the square frame, now rotate to the right by 16%
now paste these leaves again, bring to the top, resize by 80%
and then rotate to the left by 12% place towards the right of
the square frame, now duplicate and mirror, rotate this to the
left by 22% arrange so they cover the corner of the frame,
now lets open PDS_GPC-ribbon1 c/p as a new layer, resize by 75%
and then rotate to the left by 6% place with your leaves,
Now open PDS_GPC-flower5 c/p as a new layer and resize by 75%
place with your leaves and ribbon, I mirrored this one, I duplicated
it and then resized this one by 85% and then mirrored this,
Now open PDS_GPC-charm1 c/p as a new layer, resize by 40%
place with your flowers, Now open PDS_GPC-puppy1 c/p as a
new layer, resize by 70% arrange below the charm layer, now open
PDS_GPC-hearts3 c/p as a new layer, flip and then mirror, now
resize by 70% and place this layer below your flower layer
Now open PDS_GPC-ribbon3 c/p as a new layer, arrange to right
above the frame layer, resize by 70% I duplicated it and then
rotated this to the right by 96% then flipped and mirrored it, placing
up the right side of the frame, now open PDS_GPC-bow1 c/p
as a new layer, resize by 128% and then mirror, place at the
top left of the frame, now open PDS_GPC-butterfly1 c/p as a new
layer, resize by 48% now rotate to the left by 26% paste again
this time mirror and rotate to the right by 18% and resize by 48%
add more if you like, Now add a dropshadow of choice to your
elements and a tube or tubes of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Girls Just Wanna Have Fun!

Tube of choice, I used Lady Mishka and Elias Chatzoudis 
Scrap used Girls Just Wanna Have Fun Collab  PolkaDot Scraps Part
Font of choice I used aaaight
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open PDS-GJWHF-paper2 c/p as a new layer, apply a mask
of choice, I used BflyFlbyMask16

Now lets open PDS-GJWHF-wire1 c/p as a new layer, resize by
90% Now lets open PDS_GJWHF-frame1 c/p as a new layer
grab your magic wand and click inside the frame opening
expand by 9 and then invert,open PDS_GJWHF-paper9 c/p
as a new layer below the frame and hit delete. select none,
now open PDS_GJWHF-ribbon6 c/p as a new layer, place
near the top left of the frame, and rotate to the right by 15%
resize by 80% now open PDS_GJWHF-speaker1 c/p as a
new layer and place towards the right of your tag, resize
by 60% now open PDS_GJWHF-scatter1 c/p as a new layer,
resize by 60% and arrange to right above the wire layer,
I duplicated mine and then flipped and mirrored it
Open PDS_GJWHF-glasses1 c/p as a new layer, resize by 30%
and place near the speaker Now open PDS_GJWHF-musicnote1
c/p as a new layer, resize by 65% now rotate to the right by 15%
place below the glasses layer, Now duplicate and mirror, and
place to your liking, Now open PDS_GJWHF-scatter2 c/p as a
new layer place this layer right above the mask layer, place
towards the top left, duplicate and flip and mirror, now add a
dropshadow of choice to your elements and a tube of choice,
hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



She's a Star

Tube of choice, I used Rion Vernon and Caron Vinson
Scrap used Miss Mel By Pimp'd Designz
Font of choice I used Dagobert
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open pd-pp-03 c/p as a new layer and apply a mask of choice
I used a photo mask called Destress White, Not sure where I
got this but it is a commercial use mask

Now lets open pd-glitter-01 c/p as a new layer, I resized mine
by 60% and moved it up and towards the right, I then duplicated
it and placed the other down and towards the left, Now lets open
pd-frame-02 c/p as a new layer, resize by 90% and then rotate
to the left by 9% grab your magic wand and click inside the frame
opening, expand by 9 and then invert, open pd-pp-04 c/p as a
new layer below the frame, resize by 80% and then hit delete,
select none, now open pd-ribbon-02 c/p as a new layer and
rotate to the left by 9% now resize this by 64% arrange towards
the bottom of your frame, now lets open pd-frame-03 c/p as a
new layer, place this layer right above your mask layer and then
rotate to the right by 9% Now lets open pd-bling-03 c/p as a new
layer, resize by 60% and then rotate to the right by 90% arrange
towards the bottom right of the frame, now open pd-flower-02 c/p
as a new layer, resize by 60% place with the bling, now open
pd-flower-1 c/p as a new layer, resize by 50% arrange this layer
below the white flower layer, now open pd-button-01 c/p as a new
layer resize this by 60% place in the center of the white flower
now open pd-bling-02 c/p as a new layer and resize by 50%
place in the center of the button, Now open pd-flower-03 c/p
as a new layer, arrange this layer to below your paper that fills
your frame, resize by 60% and place near the top left of your
frame, now open pd-flower-01 again, c/p as a new layer right
above the flower you just added, resize by 60% and have it
peeking out towards the top left of the frame, now lets open
pd-star-01 c/p as a new layer, place towards the top left of your
frame, and rotate to the left by 9 now duplicate and mirror
move this layer below your purple flower layer and place towards
the bottom right of the frame, now add a dropshadow of choice
to your elements and a tube of choice, hide the white background
layer and merge visible. (I did not dropshadow the bling that is
above the mask layer)

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü




Back to School

Tube of choice, I used Rion Vernon and Elias Chatzoudis
Scrap used Emo Schoolgirl by PolkaDot Scraps
Font of choice I used aaaiight!
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open PDS_ES-paper9 c/p as a new layer and apply a mask of
choice, I used ufMask49

Now lets open PDS_ES-frame4 c/p as a new layer, and rotate
to the left by 9, grab your magic wand. click inside the frame
opening and expand by 9, invert, open PDS_ES-paper2 c/p as
a new layer below the frame and hit delete, select none, now lets
open PDS_ES-rubberband1 c/p as a new layer, rotate to the left
by 9 and arrange on your frame, you may need to use the raster
deform tool to stretch it out just a tiny bit so it wraps the frame good,
now open PDS_ES-books1 c/p as a new layer, resize by 60% and
then mirror and place towards the bottom left of your frame
open PDS_ES-apple1 c/p as a new layer, resize by 60% two times
place on top of your books, now open PDS_ES-crayon4 c/p as
a new layer, resize by 60% and place with your books, now
open PDS_ES-flower2 c/p as a new layer, resize by 60%
move this layer below your crayon layer and place on the books
with the apple, now open PDS_ES-flower5 c/p as a new layer
60% and place this layer to right above your mask layer in the
top left area, now open PDS_ES-flower3 c/p as a new layer
right above your red flower layer, mirror and place in the
upper left, now paste it again this time bring the layer to
the top, resize by 35% and mirror, place with your books
etc, now open PDS_ES-pencil1 c/p as a new layer resize by
80% now mirror, and then rotate to the right by 75% and lean
it against the left top of the frame, I tucked it between the
frame and rubberband layer on my tag, now open PDS_ES-chain1
c/p as a new layer, arrange this layer to right below your rubberband
layer, now rotate to the left by 9 now again you may need to
use your raster deform tool to squish it a tiny bit to wrap your
frame, I duplicated mine, Now open PDS_ES-pin1 c/p as a
new layer resize by 50% you do not need to add a dropshadow
to this now add a dropshadow and tube of
choice to your tag, hide the white background layer and merge
visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü




Key to My Heart

Tube of choice, I used Suzanne Woolcott and Rion Vernon
Scrap used My Everything by PolkaDot Scraps
Font of choice I used Delight Script
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open PDS_ME-paper17 c/p as a new layer and resize by 90%
apply a mask of choice, I used WSL MASK12 Now lets
Open PDS_ME-paper11 c/p as a new layer and resize by 90%
apply a mask of choice, I used Vix's Big mask 015

Now lets open PDS_ME-frame7 c/p as a new layer
resize by 90% grabe your magic wand and click inside
the frame openings, expand by 9 and then invert, open
PDS_ME-paper10 c/p as a new layer below your frame
hit delete and select none, now lets open PDS_ME-element26
c/p as a new layer, arrange to right above your mask
and then resize by 80% place towards the top right, now
open PDS_ME-element43 c/p as a new layer, bring to the
top arrange along the bottom of the frame, now open
PDS_ME-element42 c/p as a new layer, arrange with your
other ribbon, I flipped one of them, Now open PDS_ME-element21
c/p as a new layer, place to your liking, now open
PDS_ME-element25 c/p as a new layer arrange with your
other flower, now open PDS_ME-20 c/p as a new layer
place this with your other flowers, I mirrored mine, now
open PDS_ME-element29 c/p as a new layer, I resized
mine by 80% and placed it below one of the flowers
I duplicated and mirrored this and arranged below the other
flowers. Now open PDS_ME-element8 c/p as a new layer
bring to the top, mirror and then resize by 60% and rotate
to the left by 18% now open PDS_ME-element6 c/p as a
new layer, resize by 60% and rotate to the left by 36%
I duplicated mine and mirrored it, Now add a dropshadow
and tube or tubes of choice, hide the white background layer
and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü