Memories of the Sea

Tube of choice, I used Elias Chatzoudis and Caron Vinson
Scrap used Fun In The Sun by Kittie's Sinful Designz
Font of choice I used Affair
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open paper11 and resize by 19% c/p as a new layer
apply a mask of choice, I used DBV Mask 113 I duplicated
mine and merged the two together

Now lets open element 29 c/p as a new layer and resize
by 65% grab your magic wand and click inside the frame
opening, expand by 9 and invert, open paper10 resize
by 19% and c/p as a new layer below your frame layer
hit delete and leave selected, Now lets open element3
c/p as a new layer below the mask layer and resize by
60% arrange to your liking and hit delete, leave selected
open element78 c/p as a new layer and resize by 60%
place so just the very top edge shows and then hit delete
select none now, Open element 36 c/p as a new layer
arrange to right above your mask layer and then resize
by 60% place near the top left, duplicate, flip and mirror
place at the bottom right,now merge the two and then duplicate
and mirror, now open element19 c/p as
a new layer bring this to the top and resize by 42% and
place near the bottom right of your frame, now open
element63 c/p as a new layer, 35% place this below the
grass layer, I duplicated mine and moved the original layer
up just a bit and the duplicated layer I mirrored, now open
element58 c/p as a new layer and resize by 35% place this
layer below the top leaves layer, now duplicate and mirror
move this layer to right below the grass layer and resize this
by 75%, now open element40 c/p as a new layer and
bring to the top resize by 23% and place near the base
of the grass, now open element75% c/p as a new layer
mirror and arrange this layer to right above your mask layer
now resize by 60% now lets open element64 c/p as a new
layer arrange to right below your purple flower and resize
by 26% I duplicated mine and mirrored it and then flipped
it. Now open element 68 c/p as a new layer, arrange below
your purple flower layer and resize by 22% now lets open
element69 and c/p as a new layer resize by 22% and arrange
below your top purple flower and above the other purple
flower layer, now open element4 c/p as a new layer and
resize by 22% and flip it, arrange below your flowers
and have it peeking out the right, now open element76 c/p
as a new layer, bring to the top and resize by 20% place with
your flowers, now open element77 c/p as a new layer resize
by 23% and mirror, duplicate and rotate to the left by 21%
place them to your liking, now add a dropshadow of choice
to your tag and a tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



A Little Birdy Told Me

Tube of choice, I used Anna Liwanag and David Saavedra
Scrap used A Dream Comes True by Butterfly Dsign
Font of choice I used Chateau
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open Butterflydsign_pap9 resize by 19% and c/p as a
new layer, apply a mask of choice, I used Becky_Mask019

Now open Butterflydsign_elmnt20 c/p as a new layer
resize by 30% now rotate to the right by 9% now grab
your magic wand and click inside the frame opening and
then expand by 9 now invert, Open butterflydsign_pap8
resize by 19% c/p as a new layer below the frame, hit
delete and select none. Now lets open element81 c/p as
a new layer place this layer right above the mask layer
and resize by 40%, place towards the bottom of the frame
now duplicate and flip and place near the top of the frame
now open element73 c/p as a new layer and resize this by
40% flip and place near the bottom of the frame. Now open
element37 c/p as a new layer, resize by 25% and then rotate
to the left by 26% place near the top left of the frame,
now paste again and resize the same, place with your
other leaves. Now open element26 c/p as a new layer
resize by 25% place with your leaves, paste again and
bring to the top, resize by 30% and rotate to the left
by 78% arrange along the bottom of your frame, now
open element37 again c/p as a new layer, resize by 25
and rotate to the left by 78% now once again paste
as a new layer, resize by 25% this time mirror and then
rotate to the left by 80% arrange both of these below
the wispy layer. now lets add some flowers, open element24
c/p as a new layer and resize this by 18% place this layer
below your frame and paper layer, now open element16 c/p
as a new layer, bring to the top and resize by 18% arrange
to your liking, I duplicated mine 2 times and scattered them
on the left side of the frame,now open element12 c/p as a
new layer and resize by 30% place this layer below the blue
flower duplicate and move a bit to the right. now open element 21
c/p as a new layer place this below all flowers and resize
by 18% place so bits peek out, now open element78 c/p
as a new layer, resize by 16% arrange to your liking I
duplicated mine a couple times and mirrored it as well.
now open element2 c/p as a new layer, arrange this below
all the flowers, and resize by 30% duplicate and mirror, I
rotated the original to the right by 21% Now lets open
element59 c/p as a new layer, resize by 30% now
mirror and then rotate to the right by 9% and arrange below
your top blue flower. Now open element 11 c/p as a new
layer right above the blue bow layer, resize by 19% and
place in the center of the bow, now open element79 c/p
as a new layer and resize this by 17%, duplicate and mirror
arrange to your liking, when you are happy with your tag
add a dropshadow

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Violet Garden Beauty

Tube of choice, I used Rion Vernon and Shawlie
Scrap used Violet Garden By PolkaDot Scraps
Font of choice I used Goddess
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open PDS_VG-paper5 c/p as a new layer and apply a mask of choice
I used BtflyFlbyMask4 turn the opacity down to 60% on this layer

Now lets open PDS_VG-frame1 c/p as a new layer, grab your magic
wand and click inside the frame opening, expand by 9 and then invert
now open PDS_VG-paper2 c/p as a new layer below the frame, hit
delete and select none, now lets open PDS_VG-element43 c/p as
a new layer arrange this below the frame and paper, resize by
50% I duplicated this about 4 times, I placed one in the upper
right area of the tag, then flipped and mirrored it, placeing at the
bottom left of the tag, now moved the other 2 duplicated leaves
up above the frame layer, placing one faceing up and the the left
and the other facing down and to the right, Now lets open
PDS_VG-element16 c/p as a new layer and rotate to the right by
90% and arrange along the bottom edge of the frame, now open
PDS_VG-element67 c/p as a new layer place along the bottom
of the frame, duplicate and flip and then rotate to the right by
18%, Now open PDS_VG-element14 c/p as a new layer place
near the bottom left of your frame with your leaves, now open
PDS_VG-element15 c/p as a new layer and place with your other
rope flower, Now open PDS_VG-element 60 c/p as a new layer
and place at the bottom left as well, now lets open PDS_VG-45
c/p as a new layer and resize by 70% and place with your other
flower, now open PDS_VG-element44 c/p as a new layer and
resize by 50% place with your other element, now lets open
PDS_VG-element51 c/p as a new layer, arrange this layer below
the purple flower layer and then rotate to the right by 19%
Now lets open PDS_VG-element12 c/p as a new layer, arrange
this layer below all your flower layers and then mirror, now open
PDS_VG-element9 c/p as a new layer right above the other ribbon
now open PDS_VG-element25 c/p as a new layer arrange to right
above your mask layer, move towards the right and duplicate
and mirror, I changed the blend mode on these layers, to
soft light, when you are happy with your tag, add a dropshadow
and tube of choice, hide the white background layer and merge
visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Kiss the Cook!

Tube of choice, I used Rion Vernon and Elias Chatzoudis
Scrap used Kiss The Cook by Pimp'd Designz
Font of choice I used SwingSet BB
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open pd-pp-04 c/p as a new layer and apply a mask of choice
I used WSL_Mask297

Now lets open pd-frame2 c/p as a new layer, resize by 78%
now grab your magic wand and click inside the openings and expand
by 5 now invert, open pd-pp-02 c/p as a new layer below the frame
hit delete, leave selected, now open pd-floor c/p as a new layer
arrange so it shows in part of the bottom of the frame, hit delete
leave selected still, now open pd-fridge c/p as a new layer, resize
by 54% hit delete, now select none, now lets open pd-wa01
c/p as a new layer, place this on the paper layer in your frame
resize by 40% "Hang it " by the fridge, now open pd-blender
c/p as a new layer, mirror and resize by 50% place towards
the bottom right of your frame, now open pd-chef-hat c/p as
a new layer, resize by 50% place so it sits on the blender
now open pd-pie c/p as a new layer, arrange below the blender
layer and resize by 35% now open pd-cherry c/p as a new layer
resize by 16% and place on the top of your pie, I also duplicated
mine and scattered a few around the bottom of the tag
now open pd-bowl2 c/p as a new layer and resize by 20% place
near your blender, now open pd-rolling-pin c/p as a new layer
resize by 35% place in front of your bowls, now open pd-spatula
c/p as a new layer, flip and then resize by 35% now rotate to
the right by 18% and lean it on your bowls, now lets open pd-flower02
c/p as a new layer, resize by 55% place at the top left of your tag
open pd-ribbon-03 c/p as a new layer and resize by 45%
now rotate to the left by 21% now open pd-card c/p as a new
layer, resize by 45% and then rotate to the left by36%
I placed this under the ribbon but above the flower,
when you are happy with your tag, add a dropshadow of
choice and a tube of choice to your tag, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Dreamy Blue

Tube of choice, I used Jennifer L. Nilsson and Karen Middleton
Scrap used Beachhouse by Scrapin' Daisy
Font of choice I used AL Serenade
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open SD-beachhouse-paper023 c/p as a new layer and resize by
60% now apply a mask of choice, I used Miggs mask 1

Now lets open element077 from the kit, c/p as a new layer
and resize by 70% grab your freehand selection tool
and draw around the frame, invert the selection and open
paper024 c/p as a new layer below the frame and then
resize by 60% hit delete and select none. I used hue
and saturation to change the color to match the mask layer
Now open element 60 c/p as a new layer, resize by 45%
place in the bottom right area of the frame, I pasted it
again this time arrange to right above the mask, and resized
it by 50% duplicate and flip and arrange with the other
one you just added, duplicate, flip and then mirror, placing
this behind the one at the bottom right, now open element068
c/p as a new layer, resize by 50% and then rotate to the
right by 9% Now open element 071 and 075 c/p both
and resize them by 50% I placed one below the flower
layer, and the other below the heart layer,I also added
element 069 and resize by 50% and then rotated to the
left by 15% now add a dropshadow and tube of choice,
hide the whitebackground layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Thinking of......

Tube of choice, I used Rion Vernon and Anna Liwang
Scrap used Sand Between My Toes by Created by Jill
Font of choice I used Barbara Hand and MySoulOne
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open Paper03 and c/p as a new layer, resize by 90% and
apply a mask of choice, I used DBV_mask 106

Now lets open the wave and c/p as a new layer on your mask
Now open Frame 5 and c/p as a new layer, resize by 65% and
then rotate to the left by 12% grab your magic wand and click
inside the opening and expand by 9% and then invert, now open
paper 1 c/p as a new layer below the frame and hit delete,
select none, now open seawood c/p as a new layer and resize
by 70% and rotate to the left by 90% and then mirror, arrange
towards the bottom of your work area, now open greenery 2 c/p
as a new layer and resize by 70%, duplicate, mirror and flip, arrange
the two so the stems lay together, and with your seawood, now open
flowers 1 and c/p as a new layer, resize by 70% and then rotate
to the right by 76% I duplicated mine and moved it a bit
to the left, and then flipped it, now open the fence, c/p as a new
layer and resize by 70% place this below your wave layer,
now open flowers 2 c/p as a new layer, arrange to right above
the greenery layer, resize 2 times by 70% then mirror and rotate
to the left by 75% duplicate and move to the left a bit, duplicate
again and mirror, rotate it a bit to the right by 24% or less, now
open the shipswheel c/p as a new layer and resize by 70%
place near the bottom left of the frame, bring this layer to
the top, now open greenery 3 c/p as a new layer arrange to right
above the frame layer, resize by 60% and rotate to the left by
18% I duplicated mine a few times, mirroring and flipping them
to fill in areas, now lets open the rope, c/p as a new layer and
resize by 70% flip and then rotate to the left by 9% arrange
this layer to right above your frame layer, now open ribbon4
c/p as a new layer, arrange this to below your wheel, and your
seawood layers mirror and then rotate to the right by 5% and
then resize by 70% now open ribbon1 c/p as a new layer
arrange below the ribbon you just added, resize by 70%,
rotate to the left by 90% and then mirror, now open button1
c/p as a new layer and arrange this below your flower layers,
I duplicated mine 2 times, scattering among the greenery and
flowers, now open bow2 c/p as a new layer, arrange in the center
of the top of the frame, now paste the button again this time
place in the center of the bow, when you are happy with your
tag, add a dropshadow of choice to your elements and a tube
of choice, hide the white background layer and merge visible.
(On the Anna Liwang example I used part of the paper word art as well)

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Artistic Expressions

Tube of choice, I used Lia and Elias
Scrap used Artistic Expression by Grunge and Glitter
Font of choice I used chachie
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open paper1 and c/p as a new layer, apply a mask of choice
I used DBV_mask 107

Now open frame4 c/p as a new layer and resize by 90%
grab your magic wand and click inside the frame opening
expand by 5 and invert, now open paper2 c/p as a new
layer below the frame layer and hit delete, leave selected
now open the colored pencils and c/p as a new layer, move
this towards the bottom of the paper and hit delete, select none
I changed the opacity on this layer to 36% on my tag.
now open beadscatter2 c/p as a new layer, arrange to right
above the mask layer and resize by 50% move it up and
to the right, now duplicate, flip and mirror, now lets open
ribbon4 c/p as a new layer and resize by 80% and then
flip it, arrange along the bottom of the frame, now open
ribbon 5 and c/p as a new layer, and resize by 72% place
with the other ribbon, now open glassofcoloredpencils c/p
as a new layer and resize by 70% place towards the bottom
right of the frame, now open paintcans and c/p as a new
layer, mirror and resize by 45% and place with your glass
now open the mushroom, c/p as a new layer and resize
by 35% and place this layer below the paint cans layer
and with the glass as well, now open paperstar, c/p as
a new layer and resize by 45% and then rotate to the
left by 26% now open the tab and c/p as a new layer and
resize by 70% and place on the star, when you are happy
with your tag, add a dropshadow of choice and a tube of
choice, hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



In The Pink

Tube of choice, I used Rion Vernon and Cris Ortega
Scrap used In The Pink by x-clusively christy scraps
(full size kit used in this tut)
Font of choice I used Studio Lettering Swing
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 950x800 and flood fill white,
I like to have alot of room to work, you can always
resize your tag when done!

Open xcd-itp-paper19 resize by 19% c/p as a new layer
apply a mask of choice, I used BtflyFlbyMask4, now
move it towards the left of your work area, duplicate and
mirror, have them BARELY overlapping in the middle.

Now lets open xcd-itp-frame7 c/p as a new layer, resize by
60% now grab your magic wand and click inside the frame
opening, (this frame already has a dropshadow on it so you
will need to make sure you select all of that as well)
expand by 9 and invert, open xcd-itp-paper2 resize
by 19% c/p below the frame and hit delete, select none

Now open xcd-itp-frame6 c/p as a new layer, arrange to right
above the mask layer and then resize by 70% now rotate
to the left by 18%. Now lets open xcd-itp-fan c/p as a new
layer and resize by 30% rotate to the right by 18% place near
the bottom right of the frame, Now lets open xcd-itp-beadspill
c/p as a new layer, arrange below the fan layer, resize by 30%
now duplicate and rotate to the left by 80% arrange this one
towards the right of the frame, now open xcd-itp-flower4 c/p
as a new layer and resize by 24% place near your fan,
now paste this again, arrange to below your frame and paper
layer, resize by 42% place near the top left, duplicate
and flip and mirror, place this one towards the left edge
of the frame, now open xcd-itp-flower5 c/p as a new layer
flip this and then resize by 25% arrange to right above your
fan layer, now open xcd-itp-leaf4 c/p as a new layer, arrange
to right below your beadspill layer, resize by 32% now duplicate
and rotate to the right by 90% and then mirror, arrange along
the right edge of your frame layer, now open xcd-itp-grass
c/p as a new layer, arrange to right above your frame layer,
resize by 36% arrange along the right edge of the frame, duplicate
and rotate to the left by 90% arrange along the bottom edge
of the frame, now lets open xcd-itp-rose2 c/p as a new layer
arrange this to right below flower4 layer (the white daisy) mirror
and then resize by 24%, now lets open xcd-itp-heart2 c/p as a new
layer, arrange this layer to right above the fan layer, resize by
36% and then rotate to the right by 18%, now open xcd-itp-heart3
c/p as a new layer, arrange above the heart layer you just added
resize by 32% and rotate to the left by 18%, now lets open
xcd-itp-butterfly2 c/p as a new layer, bring to the top and resize by
36% place towards the bottom left of your tag, now paste again
this time resize by 18% and place near the top left, I added it
once more this time resizing by 15% and mirroring it. now add a
dropshadow of choice to your tag, (the frame has one already so
I did not dropshadow it) and add a tube or tubes of choice, hide
the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Sugar and Spice

Tube of choice, I used Suzanne Woolcott and Rion Vernon
Scrap used It's a Girl by Kittie's Sinful Designz
Font of choice I used Delight Script
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open paper13 and resize by 19% c/p as a new layer and
apply a mask of choice, I used 211InsatiableDreams mask
I duplicated it and merged the two

Now lets open element 54 c/p as a new layer and resize by
70% mirror and now grab your magic wand and click inside the opening,
expand by 7 and then invert, open paper 5 and resize by
19% c/p as a new layer below the ribbon and hit delete, select none
and change the blend mode on this layer to Luminance
now open element 60 c/p as a new layer and resize by 25% place
towards the bottom left, I used gamma control to brighten it up a bit
now open element 18 c/p as a new layer resize by 36% arrange below the
sheep layer, now open element 40 c/p as a new layer, arrange to right
above the lace layer resize by 45% and then duplicate and mirror,
(I duplicated both of these and moved them so it would look like a spill
of flowers) Now open element 42 c/p as a new layer and resize by 36%
arrange with your lamb and carrage, Now open element 61 c/p as a new layer
arrange to right above the mask layer and resize by 35% place
near the bottom right, duplicate, mirror and place back with the
other flower, now open element 31 c/p as a new layer, arrange to
right above the frame layer, resize by 60% duplicate and mirror
I adjusted the color to match the paper inside the frame using
hue and saturation, Now open element 33 and c/p as a new layer
resize by 60% and use manual color correction to change the color
to match your tag, Now paste it again this time resize by 45%
do the same as above this time using a darker version of the color
you just used, rotate both of these to the left by 9%. Now add a
dropshadow of choice and a tube (Or pic) of choice, hide the white
background layer and merge visible. I used a very light brown dropshadow
on the lace frame.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Snips and Snails
Tube of choice, I used Suzanne Woolcott and Toosh Toosh
Scrap used It's A Boy by Kittie's Sinful Designz
Font of choice I used SwingSet BB
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open paper 12 and resize by 19% c/p as a new layer
and apply a mask of choice, I used Becky Mask 22

Now lets open element 44 (frame) and c/p as a new layer
resize by 60%, move just a bit to the left, grab your magic
wand and click inside the frame opening, expand by 9 and
then invert, open paper 8 and resize by 19% c/p as a new
layer below the frame and hit delete, (I used hue and saturation
to change the color of the frame to grey) Now select none, Now
open element 41 c/p as a new layer, arrange to right above
the mask layer, resize by 50% and then rotate to the left
by 90% place towards the right of the frame, duplicate
flip and then mirror, Now lets open element 16 c/p as a new
layer resize by 35% place towards the bottom right of the
frame, now open element 30 c/p as a new layer and resize
by 25% and place towards the bottom left of the frame,
now open element 36 c/p as a new layer and resize by
15% place near your box, open element 51 c/p as a new
layer and mirror, resize by 25% and then rotate to the right
by 36% place so it "leans" on the ball, Now open element 48
c/p as a new layer, mirror and resize by 18% place near your
ball. Now open element 46 use manual correction tool to colorize
to match your tag, now c/p as a new layer, resize by 70%
arrange along the top of the frame, now open element 37 c/p
as a new layer and resize by 25% place in the center of the bow
now open element 12 c/p as a new layer and resize by 25% place
in the center of the flower, now open element 54 c/p as a new layer
and resize by 25% place so it hangs down from the bow you just added,
now open element 40 c/p as a new layer and resize by 30% place
in the center of your bow you added, but above the airplane layer
(hiding the top of the loop of the airplane hanger) now add a
dropshadow of choice and a tube of choice (or picture) hide
the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



A Day By The Sea

Tube of choice, I used Rion Vernon and Anna Liwanag
Scrap used Atlantis by Pimp'd Designs
Font of choice I used Aphrodite Stylistic
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open pd-pp-05 c/p as a new layer and resize by 90%
apply a mask of choice, I used Artmama Mask 06


Now lets open pd-mesh-01 c/p as a new layer and resize by
90% and then mirror this, now open pd-cluster-01 and mirror
Now open pd-sand c/p as a new layer, arrange to right above the
mask layer, now open pd-jelly-fish2 c/p as a new layer, arrange
to right above the mask layer and resize by 45% place towards
the top left of the work area, Now lets open pd-sea-grass-01 c/p
as a new layer, arrange to right above the sand layer and mirror
then resize by 80% now open pd-sand-castle and c/p as a new
layer and resize by 80% two times, place towards the left of the
mask area, I placed mine below the mesh layer, Now open pd-shell-03
c/p as a new layer, bring to the top and resize by 20% now open
pd-shell-02 c/p as a new layer resize by 20% and place along
the mesh , Now open pd-shell-01 c/p as a new layer and resize
by 20% now open pd-sea-foam c/p as a new layer, arrange to right
above your sea grass, and resize by 40% now open pd-rope-01 c/p
as a new layer, arrange to right above the mesh layer, now open
pd-pearl, c/p as a new layer, resize by 20% and place in the
open shell, Now open pd-bottle2 c/p as a new layer, arrange to
right above your mesh layer and resize by 40% place near your
sand castle, now add a dropshadow of choice, (I did not add one
to the bottle or the jelly fish, the sand, mesh or sandcastle)
and a tube of choice, hide the white background layer and
merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



The Many Shades of Rion
Version 1

Tube of choice I used Rion Vernon in Both examples
Scrap used Shades of Rion 1 by Created By Jill
Font of choice I used Secret Recipe
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

open CreatedbyJill-ShadesofRion1-paper06 c/p as a new layer
and apply a mask of choice, I used HorsePlay's Pasture Mask 22
I applyed it twice, then merged group, then duplicated this

Now lets open CreatedbyJill_ShadesofRion1_frame1 c/p as a new
layer, resize by 70% grab your freehand selection tool and
draw around the openings of the frame, and invert, open
CreatedbyJill_ShadesofRion1_paper02 c/p as a new layer
below the frame and hit delete, select none, now lets open
CreatedbyJill_ShadesofRion1_umbrella c/p as a new layer
resize by 70% and then flip it, place to your liking, open
CreatedbyJill_ShadesofRion1_bow2 c/p as a new layer and
resize by 75% and place towards the top of the frame,
now open CreatedbyJill_ShadesofRion1_flower2 c/p as a new
layer and arrange this layer below the frame and paper layer
arrange to your liking, and resize by 75% now open
CreatedbyJill_ShadesofRion1_ribbon1 c/p as a new layer
arrange below the flower and resize by 75% and move it
up and towards the right, now duplicate, flip and mirror,
Now lets open CreatedbyJill_ShadesofRion1_greenery1
c/p as a new layer, arrange this layer to right above
the frame layer, mirror and resize by 55% I duplicated
mine and mirrored it again, this time I resize by 80%
I arranged these along the left side of the frame, now open
CreatedbyJill_ShadesofRion1_key c/p as a new layer
arrange below your ribbon across the top of the frame, resize
by 75% duplicate, mirror and resize by 80% place them so the
hang behind the ribbon on the left of the frame, now open
CreatedbyJill_ShadesofRion1_bird c/p as a new layer, bring
to the top and resize by 45% place it so it is perched on
the umbrella, Now open CreatedbyJill_ShadesofRion1_stars
c/p as a new layer, arrange to right above the mask, resize
by 80% place it towards the top of the frame, duplicate and
flip, duplicate again and rotate to the right by 90% now duplicate
this one and mirror, place all four so the peek from behind the frame
when you are happy with your tag, add a dropshadow of choice
(not on the stars) and a tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Asian Mood

Tube of choice, I used  Vinegar and Simon Han
Scrap used Asian Tea House by Gemini Creationz
Font of choice I used Saliere
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open gemini_asianteahouse_p1 c/p as a new layer and
apply a mask of choice, I used BflyFlbyMask4

Now lets open gemini_asianteahouse_woodelement c/p as
a new layer, Now open gemini_asianteahouse_frame1
c/p as a new layer move towards the left a bit and resize
by 85%, Now open gemini_asianteahouse_grass3
c/p as a new layer, rotate to the left by 15% now lets
open gemini_asianteahouse_p3 , grab your magic wand
and click inside the frame opening, expand by 9 and invert
and c/p the paper as a new layer below the frame, hit delete
and select none. Now lets open gemini_asianteahouse_bamboo
c/p as a new layer, arrange this layer to right above the wood
element layer, mirror(I lightened mine just a bit) now open
gemini_asianteahouse_ricestalk, c/p as a new layer arrange this
to right above the frame layer and rotate to the right by 90%
Now lets open gemini_asianteahouse_bubbles c/p as a new
layer arrange to right above the mask layer, resize by 70% and
move up and towards the left, Now lets open
gemini_asianteahouse_circleofleaves c/p as a new layer
again right above your mask layer, flip and place towards
the bottom left, now duplicate, mirror and flip, Now open
gemini_asianteahouse_leaf3 c/p as a new layer and resize
by 45% I duplicated mine 2 times more, mirroring one
and flipping one, Now open gemini_asianteahouse_flower1
c/p as a new layer and resize by 45% place near your 3
leaves, Now do the same with flower2, now lets open
gemini_asianteahouse_flower3 and c/p as a new layer,
and resize by 40% now duplicate and mirror and resize
by 80% duplicate again and mirror again, you should now
have all your flowers and leaves clustered at the bottom
left of the frame, Now lets open gemini_asianteahouse_bow1
c/p as a new layer arrange to right above the frame layer
and mirror now rotate to the right by 18% and resize by 70%
now open gemini_asianteahouse_asiancoin c/p as a new
layer and resize by 45% place towards the bottom right of
your tag, now open gemini_asianteahouse_ricebowl c/p
as a new layer and resize by 35% and mirror, place near
the bottom right of the tag, Now open
gemini_asianteahouse_chopstickes
c/p as a new layer, mirror and resize by 38% and then
rotate to the right by 35% and lean it aganst the bowl
Now open gemini_asianteahouse_butterfly, c/p as a new
layer and resize by 42% and then rotate to the right by
12% place in the center of your bow, I duplicated mine
2 times, resizing these by 75% and placing them near the
bamboo, when you are happy with your tag, add a dropshadow
of choice and a tube of choice, hide the white background layer
and merge visible.(do not dropshadow the bubbles)

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Pretty in Purple

Tube of choice I used Elias Chatzoudis and Rion Vernon
Scrap used Pretty Girl by PolkaDot Scraps
Font of choice I used Aprodite Stylistic
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 650x650 and flood fill white,
I am trying to make my tags smaller so I am going to start with
a bit smaller work area, this is your choice if you want
to make a larger tag.

Open PDS_PG-paper3 c/p as a new layer and apply a mask of
choice, I used Tanya Mask 3

Now open PDS_PG-scatter1 c/p as a new layer, Now open
PDS_PG-frame2 c/p as a new layer, Open PDS_PG-bracket1
c/p as a new layer, resize by 60% grab your magic wand
and click inside the opening, expand by 1% and then invert
open PDS_PG-paper10 c/p as a new layer below this frame
and hit delete, select none, now open PDS_PG-corset1 c/p
as a new layer, bring to top and resize by 60% and then rotate
to the right by 12% Now open PDS_PG-flower8 c/p as a new
layer and resize by 60% duplicate and mirror, now open
PDS_PG-ribbon2 c/p as a new layer, arrange below your flowers
and then mirror, now open PDS_PG-flower3 c/p as a new layer
resize by 45% and place below the other flowers, duplicate,
and move a bit to the right, now open PDS_PG-feather, c/p
as a new layer and resize by 45% duplicate, mirror and rotate
to the right by 40% Now paste the feather again, arrange
this to right above your mask layer and then mirror and rotate
to the right by 90%, Now open PDS_PG-gem1 c/p as a new
layer and resize by 40% rotate to the right by 12% arrange
this to right above your corset layer, now paste it again
this time arrange to right below your purple flowers resize by
45% and rotate to the left by 90% Now open PDS_PG-gem2
c/p as a new layer and resize this one by 45% and place near
the other gem, now add a dropshadow of choice to your tag,
I did not dropshadow the feathers on mine, Now add a tube
or tubes of choice, hide your white background layer and
merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü