Out To Sea Tube of choice, I used Suzanne Woolcott and Elias Chatzoudis Scrap used Friendship collection : Christy AKA Aqua By Scrapity Scrap and More Font of choice I used Pieces of Eight and Angelina Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white,( you can ALWAYS resize later, I like having plenty of room to work) Open SSAM_Aqua_Element71 c/p as a new layer, Now open SSAM_Aqua_Element20 c/p as a new layer, I used my selection tool and cropped a bit off each side, now add a round mask of choice to this, I duplicated it 2 times and lined them up top to bottom of the "fence" layer, Now open SSAM_Aqua_Element84 c/p as a new layer, resize by 70%, Now open SSAM_Aqua_Element58 c/p as a new layer, move this down below your pier layer and place at the end, now open SSAM_Aqua_Element60 c/p as a new layer (above the pier layer) I duplicated mine a few times to fill in areas and make it blend, now open SSAM_Aqua_Element83 c/p as a new layer, resize this by 40% move over towards the left of your sand, open SSAM_Aqua_Element3 c/p as a new layer resize this by 40% place with your sea shell, open SSAM_Aqua_Element12 c/p as a new layer, resize by 40% and place with your other sea shell and bottle, moving this layer below your bottle layer, open SSAM_Aqua_Element65 c/p as a new layer resizing again by 40% and placing with your other shells, open SSAM_Aqua_Element26 c/p as a new layer and resize this by 40% image rotate free rotate by 30% to the left and place with your sea shells, now open SSAM_Aqua_Element52 c/p as a new layer, resize this by about 25% and place out on the edge of the boat, now open SSAM_Aqua_paper3 c/p as a new layer RIGHT above your white layer, add the same mask as you did on the other mask layer. Now open SSAM_Aqua_Element86 c/p as a new layer, resize this by about 40% and move this layer to right above your "water layer" duplicate and arrange to look like more than one wave is breaking, you can use my tag as an example, now add a drop shadow of choice to your elements, and a tube of choice, Hide your white background and merge visable, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Ella' Lot of Fun Tube of choice, I used Suzanne Woolcott and Elias Chatzoudis Scrap used WheeHoo by Ella HippyHoppy Template used Template 9 by Yvette Font of choice I used Hey Gorgeous Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open your template duplicate and close the original, go up to image canvas size and resize it up to 750x750 (I like to have alot of room to work) delete the copyright layer, go to the large circle layer, select all float defloat, selections invert, (On some templates you have to go selections smooth I usually go about 10 to not have the jaggady edges) open Wheehoo_paper_16 resize using smartsize by 18% c/p as a new layer hit delete, and select none, delete the original large circle layer, Now go to your large photo layer, do the same as above, I used Wheehoo_paper_09, Now we want to do our small photo layer, Do the same as above, I used Wheehoo_papar_02, On the Flower layer do the same as above, I used Wheehoo_paper_05 Now open Wheehoo_gemstone3 and c/p as a new layer, I resized by 28% smartsize, and put it as the center of my flower, I used Wheehoo_elefant4 resizeing it by 10% and placed it to the right of my small frames, Now open Wheehoo_SatinCurl1 and c/p as a new layer right above your white background layer, resize this by 20% arrange to your liking, Now open Wheehoo_RibbonHeart1 c/p as a new layer, (makeing sure it is the top layer) resize this by 20% arrange to your liking or use my tag as an example, I used Wheehoo_paper_07 as my mask layer, I used a round mask, you can add any other elements you like or you can now add your tubes, and a drop shadow of choice. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Pretty In Pink Tube of choice, I used Suzanne Woolcott and Rion Vernon Scrap used Just Us Girls By PolkaDot Scraps Font of choice I used Affair by Rob Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open PDS_JUG-paper8 c/p as a new layer, resize this by 80% smartsize and apply a mask of choice (I used a round mask) I then moved it up and to the left a bit, I duplicated this and then did image flip image mirror, I then merged these 2 mask layers together and turned the opacity down to 70%. now open PDS_JUG-frame4 c/p as a new layer, resize this by 80% move up and to the left, now layer duplicate and then image mirror and image fiip, now lets open PDS_JUG-frame 5 c/p as a new layer, Now open PDS_JUG-frame6 c/p as a new layer, I recolored this using Hue map and these setting below Now lets open PDS_JUG-element33 c/p as a new layer, now resize this by and 55% then go image rotate free rotate to the right by 16% arrange towards the bottom right of your tag, now lets open PDS_JUG-11 c/p as a new layer, arrange this layer so it is right on top of frame 6, go image mirror and arrange to your liking, duplicate this and bring the duplicate layer to the top, mirror and resize this by 60% arrange it on the folded card bottom edge right. Now open PDS_JUG-element1 c/p as a new layer, arrange this layer to right below the folded card layer, image mirror. Now Open PDS_JUG-element10 c/p as a new layer, resize this by 50% and arrange to your liking, Okay now grab your magic wand and click inside the heart frame selections modify, expand by 6 selections invert now open PDS_JUG-paper8 again, c/p as a new layer right below this heart frame layer, image resize by 80% hit delete, leave selected, now add your tube of choice, in my examples I added the tube and enlarged it a bit, moved it up to the far left side of my frame, and turned the opacity down to about 60% and then changed the blend mode to luminance (L) then pasted the tube again, hit delete to rid the excess hanging outside the frame, now using the magic wand, click inside the folded paper heart area, selections modify expand by 6 selections invert, open PDS_JUG-paper3 c/p as a new layer below the folded paper area, hit delete, leave selected, now paste your tube again inside this frame, select none, now add a drop shadow of choice to your elements, I did not drop shadow the glitter frame. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Violets Tube of choice, I used Suzanne Woolcott and Jessica Galbreth Scrap used Blue Dream by Graziela Mendes Font of choice I used Pea Sarahloo Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white,( you can ALWAYS resize later, I like having plenty of room to work) Open gmendes_blue-dream_element 01 c/p as a new layer, resize this by 20% using smartsize. now resize this again by 60% move it up and to the left, image duplicate and image flip and mirror, now open gmendes_blue-dream_element 16 c/p as a new layer, resize this by 20% as well, Open gmendes_blue-dream_element 10, c/p as a new layer resize by 20% and then again by 50% I rotated mine to the left by 9% now layer duplicate, image rotate to the left by 90% and then mirror it arrange to your liking, Now open gmendes_blue-dream_element 17 c/p as a new layer, image resize by 12% and then image mirror, move this over towards the left of your frame ( over the vines you just put on your tag) Now open gmendes_blue-dream_element 19 c/p as a new layer image resize by 20% image mirror and move it towards the right of your frames, I duplicated this and resized it by 70% and then image mirror, duplicate this again and resize by 70% I arranged all three to look like they were tied together on the right side of the frame. Now open gmendes_blue-dream_element 21 c/p as a new layer resize by 20% move this layer down to right above the leaf layer, now arrange to your liking, Grab your magic wand and click inside the openings of the frames, selections modify expand by 10 selections invert, open gmendes_blue-dream_paper 09 resize this by 19% smartsize, c/p below your frame layer, hit delete and leave selected, now add tubes of choice, hitting delete again to get rid of any excess outside the frames, deselect when satisfied with placements, now using gmendes_blue-dream_paper 09 again add a mask of choice, add a drop shadow of choice to your elements, I did not dropshadow the the leaves or the flower spray, hide your white background layer and merge visable. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Rainbow Sherbert Tube of choice, I used Suzanne Woolcott and Jennifer L. Nilsson Scrap used Summer Sorbet By Baby Cakes Scraps Font of choice I used Boingo and also Blanchard Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white,(you can ALWAYS resize later, I like having plenty of room to work) Open BCS_rectangle_frame and c/p as a new layer, resize this by 70% click inside the frame, selections modify expand by 5 selections invert, open BCS_Paper_C c/p as a new layer (below your frame) image resize by 70% hit delete, leave selected, open BCS_Tree c/p as a new layer, image resize by 70% move over towards the right of your tag, hit delete, leave selected, now open BCS_Rainbow, c/p as a new layer, resize this by 40% (or what ever you like) hit delete leave selected still, and turn the opacity down on this layer to 55% open BCS_Sun, c/p as a new layer, resize this by 38% now you can select none, on the sun layer, go image mirror and arrange to your liking, Open BCS_Doodle, c/p as a new layer, move this down to right above your white layer, move up and to the right of your tag, now duplicate and go image mirror and then image flip, Open BCS_Paper_J c/p as a new layer RIGHT above your white layer, go layer, load mask from disc and apply a squarish mask. I duplicated and then mirrored and flipped mine, I turned the opacity down to 55% on each mask layer. Now open BCS_Bluebird, BCS_Yellow Bird and BCS_Pink bird, c/p each as a new layer, resize each by 15% and arrange to your liking, now open BCS_Butterfly_C and c/p as a new layer, resize this by 25% image rotate this to the left by 21% now image mirror and place on the top right of your frame, open BCS_Paper_Butterfly and c/p as a new layer resize this by 15% arrange to your liking, Open BCS_Butterfly_A c/p as a new layer and resize this by 25% and arrange to your liking, Now open BCS_Wordart_A and c/p as a new layer, resize this by 25% Now I used Eyecandy gradient glow with these settings below on my frame, the doodles, the word art, and my name (applying it two times on each thing) Note the paint can positions in the second screen shot I added a drop shadow after applying the gradient glow with these settings 2-2-50-5.00 black. Now you can add a tube of choice or you can leave your tag as is. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Nautical Girl Tube of choice, I used Suzanne Woolcott and Rion Vernon Scrap used Sea by Graziela Mendes Font of choice I used chachi Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open gmendes_sea_paper08 c/p as a new layer resize by 15% smartsize, now open gmendes_sea_frame 03 c/p as a new layer image resize by 15% smartsize duplicate this frame, on the first one go image rotate free rotate to the right by 15% on the second frame go image rotate free rotate to the left by 9% arrange to your liking, Now lets open gmendes_sea_element 09 c/p as a new layer and image resize by 16% smartsize, arrange towards the top of your tag, now open gmendes_sea_element 08 c/p as a new layer image resize by 24% and arrange to your liking, now open gmendes_sea_element 26 c/p as a new layer and image resize by 15% open gmendes_sea_element 24 c/p as a new layer resize by 5% and arrange around your treasure chest, do the same with gmendes_sea_elements 33 resizing this by 6% image rotate free rotate to the right by 15% open gmendes_sea_element 19 c/p as a new layer and resize this by 10% mirror this and arrange with the other shells, Now open gmendes_sea_element 17 c/p as a new layer, arrange this layer to right above the "sea" sign, resize by 15% and move over towards the right of the tag, Now open gmendes_sea_element 36 c/p as a new layer, image resize by 10% and arrange to your liking, now open gmendes_sea_element 27 c/p as a new layer image resize this by 16% arrange this layer right below your treasure chest layer, now open gmendes_sea_element 34 c/p as a new layer resize by 15% move this layer below your coral layer, Now grab your magic wand, open gmendes_sea_paper05 duplicate and resize this by 10% now go image rotate free rotate (ALL LAYERS CHECKED) to the right by 12% now click inside your top frame (the one rotated to the right) selections modify expand by 8 selections invert, now copy and paste the paper behind the frame layer, arrange to your liking hit delete to get rid of the excess and select none, Okay now open gmendes_sea_paper 06 we are going to do the same as above but this time rotating it to the left (ALL LAYERS CHECKED) by 9% grab the magic wand again and click inside the bottom frame selections modify expand by 8 selections invert paste the paper and hit delete, now you can add your dropshadow of choice to your elements, I used lokas 3d shadow but you can get the same effect with psp dropshadow, with these setting 2, 2, 50 , 5 black. Now hide your white background layer and merge visable, you can leave your tag like this or you can add a tube of choice, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

I Love Nature Tube of choice, I used Suzanne Woolcott and Rion Vernon Scrap used Beri Bug Frolic by Gemini Creationz Font of choice I used Good Vibrations by Rob (PTU) Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open gcz-bbf-frame1 c/p as a new layer, image resize by 140% smartsize (all layers NOT checked) now open gcz-bbf-rock c/p as a new layer and arrange to your liking (you can use my tag as an example if you like ) resize this by 70% layer duplicate and then image mirror, duplicate again and resize this by 80% and arrange with the other rocks, I placed mine on the left hand side of my frame Open gcz-bbf-grass 1 c/p as a new layer, and arrange around your rocks, I duplicated mine and mirrored it, then put the smallest rock layer above both of these. now open each of the gcz-bbf-mushrooms c/p as new layers and resize to your liking, arrange these around your rocks and grass, I resized mine from 20% to 30% I also duplicated the grass again and resized that as well, Now open gcz-bbf-fern and c/p as a new layer I put this behind my rocks, I duplicated this and moved it up and to the right of my frame, duplicated again and flipped it, now open gcz-bbf-flower1 c/p as a new layer and place over the 2 ferns at the top right, layer duplicate and flip, arrange to your liking. Now open gcz-bbf-fern2 c/p as a new layer and place this layer below your frame layer, move it over to the left side of your tag, duplicate and resize by 60% image rotate to the left by 18% I duplicated this again and moved it over just a bit to the right. now open gcz-bbf-butterfly2 c/p as a new layer, resize it by 30% I darkened mine up just a bit, and place it on the rocks, now open gcz-bbf-butterly1 and c/p as a new layer, resize it by 40% and place it on your daisy at the top right. Now grab your magic wand and click inside your frame, selections modify expand by 8 selections invert, open gcz-bbf-paper6 c/p as a new layer below your frame layer, hit delete, leave selected, Now add your tube, and hit delete to rid the excess that may be hanging outside the frame, I used a close up tube. I also changed the blend mode on the Gorjuss example to luminance (L) now add a drop shadow of choice to your elements, I did not dropshadoe the grass layers or the fern layers. I picked a color from the daisy's and added a mask layer with that color I used a round mask. now hide your white background and merge visable. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Down By the Pond Tube of choice, I used Suzanne Woolcott and Jennifer L Nilsson Scrap used Lilly Pad by PolkaDot Scraps Font of choice I used MTF Peach Cobbler Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open PDS_LP-element37 and c/p as a new layer, image resize by 45%, image rotate free rotate to the left by 18% move over to the left of your image, now lets open PDS_LP-frame1, c/p as a new layer, now lets open PDS_LP-element39 and c/p as a new layer right above your white layer, now lets open PDS_LP-element20 and c/p as a new layer, move this over towards the right a bit, now lets open PDS_LP-paper1. grab your magic wand and click inside your frame, selections modify expand by 8 selections invert and paste the paper BELOW your frame layer, hit delete, leave selected, selections invert and add a new layer, flood fill this with white, move it below your paper layer, now turn your paper layer opacity down to 55% now lets open PDS_LP-element3 and c/p as a new layer, arrange to your liking, hit delete to get rid of the excess hangin outside the frame. select none, now lets open PDS_LP-element7 c/p as a new layer, image resize this by 45% move over towards the left of your frame, duplicate and move this up a bit. now lets open PDS_LP-element21 c/p as a new layer above your frame layer, move towards the bottom left of your frame, layer duplicate and image mirror, now lets open PDS_LP-element15 c/p as a new layer, resize this by 45% and move over and towards the right of your frame at the bottom, now lets open PDS_LP-element16 c/p as a new layer, resize this by 60% and move this layer down below the other flower you just pasted, and arrange to your liking, now lets open PDS_LP-element2 c/p as a new layer, image mirror and image resize by 45% move this over towards your letter and make him look like he is sitting on the branch. now lets open PDS_LP-element19 c/p as a new layer image resize this by 26% and image rotate to the right by 21% paste it again and resize again by 26% and now rotate to the left by 12% place these to your liking, or you can use my tag as a guide, Now you want to add your tubes of choice, and a drop shadow of choice to your elements, I did not dropshadow the small leaves or the bubbles, I used PDS_LP-paper1 for my mask layer and a round mask, this is your tag so use what you want. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Down By The Sea Tube of choice, I used Suzanne Woolcott and Rion Vernon Scrap used Sweet Escape by Cora's Creations Font of choice I used Angelina Graphic Program of choice, I use PSP 9 This Tutorial is dedicated to one of my Dear Friends Janeann Thank you sweetie for being so supportive of me and for you friendship it means the world to me! This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! This Tutorial is a bit long, and I apologize! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open cc-pp-10 Go to your preset shape tool and choose eclipse. Line width set to 9 and color white, and background set to pattern, find your paper you have open, draw out a circle on your image. now convert to a raster layer, Open cc-pp-07 do the same as above, making the circle as close to the same size as you can. convert to a raster layer, and now Open cc-pp-01 and do the same thing again. making it the same size (or as close as you can) to the other circles. Now we want to open cc-pp-07 up again, go to your preset shapes and choose the rectangle setting, line width 15 this time you want your pattern as your foreground (the paper) and the background set to null. Now Draw out a rectangle, you can use my tag as an example, convert it to a raster layer, select all float defloat, modify expand by 8 add a new layer move this below your frame layer and flood fill with white, select none, go back to the frame layer and merge down, go image rotate, and rotate to the right by 6% duplicate and go image mirror, move it over to the left side of your tag, now when you are satisfied with your frame placements merge those two layers, grab your magic wand and click inside the frame openings, grab cc-pp-08 c/p as a new layer below your frames, selections invert and hit delete. leave selected. now open cc-greens-02 c/p as a new layer below your frames but above your paper, image resize by 40% and arrange inside your frames, I duplicated it a couple times to fill them up at the bottom edge. (I actually did this in one frame, then hit delete to get rid of the excess hanging out of the frame selected none, merged the greens layers together, then duplicated and mirrored it into the other frame) Now open cc-net-02 c/p as a new layer above your circles but below the frame backgrounds, duplicate and merge down duplicate once more and merge down this makes the net show up a bit more. Now open cc-fish-01 c/p as a new layer and arrange to your liking, I resized mine by 40% and hung it in the net, I did the same with cc-starfish resizing it by 18% and also used cc-sand-dollar and resized it by 18% as well, you can add more or less this is your tag, Now if you want to add the water to your frames like I did, go back to your paper background layer and select all float defloat selections invert, now open cc-water-01 and c/p as a new layer, resize this by 66% move it over to your right frame, and behind the greens layer, now duplicate and move it up just a bit, duplicate once again and move it up a bit, hit delete on each of those layers to rid the excess from out side the frames, select none, now merge those water layers together, duplicate it and mirror it to the other frame ( you may have to move it a bit to make it fit right) Now open cc-sail-boat and c/p as a new layer above the water layer, in the LEFT frame, image resize by 21% and arrange to your liking, I duplicated mine. now open cc-palm-tree and c/p as a new layer above the water and behind the greens and place it in the right frame, resize this by 60% and arrange to your liking, go back to the paper background again and select all float defloat selections invert and now go back to the palm tree layer and hit delete. now you can add a dropshadow of choice to your elements, I did not add one to my net layer, or the greens or water, but I did for everything else. hide your white background and merge visable, Now open cc-sand and c/p as a new layer move it over to the right a little, image duplicate, and then image mirror, you can add more elements if you like or not it is your tag, now add your tube of choice to your tag and a dropshadow of choice to the tube, resize add your copyright info and save as I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

My Friends are always in My Heart! This tut is dedicated to Two sweet ladies that I consider such dear friends!! Joy and Kathy! Joy gifted me with a BEAUTIFUL Scrap gift yesterday and dear Kathy gifted me with the new Gorjuss Tubes Willow and her Woodland Friends so ladies this tut is for you!! Tube of choice, Suzanne Woolcott Scrap used April showers by Created by Jill Font of choice I used Arkhive Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open AS_paper09_cbj and c/p as a new layer, resize by 85% and apply a mask of choice, I used a around mask. Open AS_boxes1_cbj and c/p as a new layer, Open AS_boots_cbj and c/p as a new layer, image resize by 50% and move over towards the right of your tag. now Open AS_ladder_cbj and c/p as a new layer, resize this by 50% and move over towards the left of your tag, leaning it up against your boxes. now Open AS_umbrella_cbj and c/p as a new layer resize this by 80% and move this layer Below the boots layer. now Open AS_leafspill_cbj and c/p as a new layer, Mine is right above the box layer duplicate this and mirror arrange to your liking. now Open AS_bird_cbj and c/p as a new layer, I place this right above the box layer and resized it by 45% now add your tubes of choice, I am using the new "Willow and her woodland Friends Tube" by Suzanne Woolcott I used a leaf from this set, the lady bug, the darling hedgehog, Willow and her Bunny and the Heart in the wording at the top! I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

A Haunted Love Tube of choice, I used a free tube I aquired years ago if it is yours please contact me and I will credit you accordingly!! You can get it HERE and Zindy S D Nielsen Tube Scrap used La Tua Cantante By Cora's Creations Font of choice I used The Nauti Girl by Rob Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Now open cc-frame-06 c/p as a new layer, I resized mine by 125%, grab your magic wand and click inside the frame selections modify expand by 8, selections invert, now open cc-pp-06 and c/p below the frame layer and hit delete, leave selected,now add your tube of choice or the one I supplied, hit delete again, select none. I duplicated the zindy tube and on the first layer changed my blend mode to darken and turned the opacity down to 44% and on the other tube layer changed the blend mode to soft light. Now Paste this paper again right above your white layer go image resize by 125% (I alwyas use smart size to resize papers and elements while making a tag) add a mask of choice to your paper. Now open cc-music-sheet and c/p as a new layer resize this by 50% go duplicate this now image rotate to the right by 21% on the duplicated layer go image rotate to the left by 12%. Now open cc-light-01 and c/p as a new layer below the sheet music, move it over towards the left of your frame, Now open cc-musice-01 c/p as a new layer and place it behind your sheet music as well, Now open your cc-lace-01 and c/p as a new layer below your frame and move it up towards the top of the frame, change the blend mode to soft light, Now open your cc-sparkle-01 and c/p as a new layer, image resize by 45% move up towards the top left of your frame, layer duplicate and then imager flip and image mirror move towards the bottom right of your frame. Now open cc-wa-01 and cc-wa-02 c/p each as a new layer, go image resize by 45% and place one at the top left of your frame and the other at the bottom right of your frame, Now open cc-tag-01 c/p as a new layer image resize by 50% image rotate by 21% to the right. move this up and to the right of your frame, now add a drop shadow of choice to your elements, I did NOT add one to the tube layer or the sparkles . now hide your white background layer and merge visable, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

A Pirates Life for Me Tube of choice, I used Suzanne Woolcott and Elias Chatzoudis Scrap used SeaInside by Scrapping Mar Font of choice I used Pieces of Eight My word art HERE Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open SeaInside_SMar24 and c/p as a new layer, resize this by 45% Duplicate this layer and rotate to the right by 10%, move over to right of your canvas a bit. Now Open SeaInside_SMar12 c/p as a new layer image resize this by 25% and move over toward the bottom left of your tag, rotate to the left by 10%. Now Open SeaInside_SMar59 c/p as a new layer and resize this by 70% arrange near your map I put this layer below the map layer, Now Open SeaInside_SMar57 c/p as a new layer and resize this by 45% now Open SeaInside_SMa65 c/p as a new layer resize this by 75% and arrange to your liking, Now Open SeaInside_SMar67 c/p as a new layer and resize this by 60% arrange to your liking, now grab your magic wand and go to your left hand frame layer and click inside the frame, selections modify expand by 5 selections invert, open a paper of choice, I used SeaInside_SMar3 and resized mine by 60% paste this BELOW your frame layer and hit delete, Select none, Now go to your right frame layer and do the same as above (making sure to paste your paper above frame one but below frame 2), this time leaving it selected, after you hit delete, if you want to put a tube in the frame like example tag 1 is done. Now grab a paper of choice and c/p as a new layer, and apply a mask of choice, You can add my word art if you like or not this is your tag make it how you would like my tut is just a guide, now add a drop shadow of choice to all your elements, hide your white background layer and merge visiable. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

When the Rain Falls Tube of choice, I used Suzanne Woolcott and Rion Vernon Scrap used Rain Drops by PolkaDot Scraps Font of choice I used Too Much Paper Template used Template 30 by Babes Designz Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open your template and duplicate, close the original, now go image canvas size, I bumped mine up to 850x850 to have room to work this templete is set that when you resize up it automatically makes your white background layer fit, Now delete the copyright layer, and also layer 3, select your rectangle layer one, selection all, float, defloat, selections invert, now open PDS_RD_paper5 c/p as a new layer and hit delete, select none, delete the original rectangle layer, go to your rectangle layer 2 select all float, defloat, selections invert, now open PDS_RD_paper4 c/p as a new layer, hit delete and select none, delete the original rectangle layer, now go to the circle layer(4)select all, float, defloat, selections invert, now open now open PDS_RD_paper3 c/p as a new layer, hit delete, select none, now delete the original circle layer, Now select the 2 rectangle layer (5) select all, float, defloat, selections invert, now open PDS_RD_paper14 c/p as a new layer, (I resized mine by 75% smartsize) hit delete and select none, delete the original 2 rectangle layer on the template. leave the little boxes layer (6) of the template the way it is, now open PDS_RD_element12 c/p as new layer right above your white background layer, move this over to the left of your tag a bit, duplicate this layer, and image mirror, now open PDS_RD_element18, c/p this as a new layer, now open PDS_RD_element19 c/p this as a new layer, image mirror. now open PDS_RD_element35 c/p as a new layer, image resize by 50% smartsize, I duplicated this a couple times I also used free rotate set on 18% a couple times as well, arrange to your liking, You can use my tag as an example, (HINT: if you paste something behind a layer and cannot see it you can always use your raster deform tool to find it and move it where you want it) now open PDS_RD_element48 c/p as a new layer and move this up and to the left of your tag, now open PDS_RD_element46 c/p as a new layer, move this down and to the right of your tag, now open PDS_RD_element47 and place this beside your last flower you pasted, now we want to move up to our top layer, now open PDS_RD_element11 c/p as a new layer go image resize by 50% smartsize and move over to the bottom left of your tag,now open PDS_RD_element5 and c/p as a new layer, resize this by 25% place this near your umbrella, now add a drop shadow of choice to all your elements, and rectangles. Now add a tube of choice to your tag and dropshadow to that, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Woodland Faeries Tube of choice, I used The darling fairies in the scrap and Suzanne Woolcott Scrap used My Magical World by Aussie Scrap Designs Font of choice I used TheNautiGal by Rob Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open Mushroom_House and c/p as a new layer, duplicate and resize by 50% move this over to the right just a bit and line up the bottom edges, Now open Mail box c/p as a new image resize by 40%, place over towards the left of your canvas, now open grass1 c/p as a new layer, image resize by 40% 2 times, place around the base or your mushroom houses and your mailbox, duplicate the layer and mirror a few time until you are satisfied with the amount you like. Now open reed 1 and reed 2 c/p each as a new layer and resize each 2 times by 40% again duplicate a few times and place to your liking around your houses and your mailbox. now go to your white background layer and add a new layer, grab your psp lawn tube and place a few "stamps" here and there until you are satisfied with your "lawn" now again go to your white background layer and add a new layer, I grabbed my selection tool and switched it over to rectangle and drew out a rectangle a little larger than the lawn in width and from behind the lawn and up above the mushrooms (this will be your sky) flood fill this selected area (ON the new layer) with #d7ddf9 select none, now apply a round mask of choice, now open your hyacinths elements, I used all three, and c/p as a new layer, I resized these by 40% 2 times and placed them between my houses, Open the ladder and c/p as a new layer, resize this by 65% and place it up against the larger of the mushroom houses, Open the bridge and c/p as a new layer, resize this by 65% move this layer below your mailbox layer and place behind the mailbox. now open the rainbow and c/p as a new layer right above your mask layer, now duplicate this layer and merge down, duplicate once again and merge this down. now mirror this and place part of the way behind your mushroom house. now add a drop shadow of choice to your elements, I only added to the mushroom houses, the bridge , the ladder and the mailbox. now add your tubes of choice, add a drop shadow of choice to your tubes and hide your white background layer and merge visiable. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

In The Red Tube of choice, I used Elias Chatzoudis, and Suzanne Woolcott Scrap used Doctor Doctor by PolkaDot Scraps Font of choice I used The Nauti Gal by Rob Graphic Program of choice, I use PSP 9 mura' copies (I cannot find a place to download this anymore sorry) This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open PDS_DD-element13 c/p as a new layer, image resize by 70% smartsize, now go to mura's copies and use these settings Now Open PDS_DD-frame4 c/p as a new layer, image resize this by 70%. Grab your magic wand and click inside the frame, selections modify expand by 5 selections invert, now open PDS_DD-paper8, c/p as a new layer (below your frame layer) hit delete and select none. Now Open PDS_DD-element33 c/p as a new layer, image resize by 70%, now image rotate free rotate to the left by 75%, move down towards the bottom of your frame, duplicate this layer and then go image mirror. Now Open PDS_DD-element27 and c/p as a new layer, resize by 45% and move over towards the right of your "greenery" Now Open PDS_DD-element12 and c/p as a new layer resize this by 45% and move it over towards your Heart. image rotate to the right by 21%. Now Open PDS_DD-element10 c/p as a new layer, move this up and to the left of your tag, image resize by 70%.Now Open PDS_DD-element32 c/p as a new layer and resize by 60% now image rotate right by 78%, duplicate this and go image mirror, you can use my tag as an example how to place them, I moved the down to the layer right above the greenery and below the heart and "tag". Add a drop shadow of choice to all your elements, I used PDS_DD-paper5 and a round mask behind my tag . you can now add your tube of choice. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Doctor Doctor, Give me the News! Tube of choice, I used artwork of Elias Chatzoudis and Suzanne Woolcott Scrap used Doctor Doctor by PolkaDot Scraps Font of choice I used BankGothic BT MT and Chachi Graphic Program of choice, I use PSP 9 Wordart for The Elias version HERE This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open PDS_DD- element29 c/p as a new layer, resize this layer by 65% duplicate and mirror and move down and to the right, duplicate once more and go image rotate free rotate by 36% to the right now flip this layer. and move up towards the left of your image, Open PDS_DD-frame6 c/p as a new layer and go image rotate by 15% paste the same frame again and then line up the edges on the left hand side. Grab your magic wand and click inside the top frame, selections modify expand by 5, now selections invert, open PDS_DD_paper11 c/p as a new layer below this frame, and hit delete, select none. Grab your magic wand and click inside the bottom frame, selections modify expand by 5, now selections invert, open PDS_DD_paper12 c/p as a new layer below this frame, and hit delete, select none. Open PDS_DD-element 2 and c/p as a new layer (above your frame layers) image resize by 40% and move down and to the right of your tag, Open PDS_DD-element3 c/p as a new layer image resize by 25% and move over and towards the left of your tag, image duplicate and image mirror, place it on the top right of your tag I duplicated once more and crisscrossed in one area, Open PDS_DD-element6 c/p as a new layer, image resize by 25% now image rotate to the left by 45% place it down near your stethescope. Open PDS_DD-element8 c/p as a new layer and resize by 15% now place this where you want on your tag, duplicate a couple times and place these randomly on your tag, (You can use mine as an example if you like) Open PDS_DD-element7, c/p as a new layer, image resize by 35% place this towards the bottom left of your tag. image rotate to the left by 15%. Now you can add your tubes of choice, what I did was go to my paper layers inside the frame, select all, float, defloat and then selections invert, c/p tube of choice and hit delete, I changed the blend mode on the tube to luminance (L), once you are satisfied with your placements and tubes, add a dropshadow of choice to everything. On the Gorjuss example I added Get Well Soon in the top frame using BankGothic BT MT and On the Elias version I added Doctor Doctor Give me the News using chachi,I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

As Pretty as a Flower Tube of choice, I used artwork of Suzanne Woolcott and Zindy S D Nielsen Scrap used Love Flower by Graziela Mendes Designs Font of choice I used Water Brush Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open gmendes_love-flowers_frame01 and c/p as a new layer, image resize by 30% smartsize. Now lets open gmendes_love-flowers_ribbon03 and c/p as a new layer image rotate free rotate by 11% to the right nowresize by 36% smartsize, arrange it so it looks like it is wrapping the bottom edge of the frame. Now lets opengmendes_love-flowers_element01 and c/p as a new layer, resize by 20% and place this below the ribbon layer on the lefthand side of your frame. Now open gmendes_love-flowers_flower03 and c/p as a new layer, resize this by 15% image mirrorand move over to the left hand side of your frame, arrange it so the greenery shows at the top and bottom behind the flowers. now open gmendes_love-flowers_flower02 and c/p as a new layer, image resize by 7% and place this over towards the left of yourframe with the "bunch" of flowers, you can use my tag as a guide, I duplicated this flower and placed one under the ribbon towardsthe right hand side of the frame as well, now open gmendes_love-flowers_tag01 and c/p as a new layer, resize this by 14% and imagerotate free rotate to the right by 18%. place this in the center of your bow/ribbon, Now lets open gmendes_love-flowers_paper18 c/pas a new layer right above your white layer and resize by 18% smartsize, grab your magic wand and go to your frame layer, click inside the frame opening , go selections modify expand by 5 now selections invert, go back to your paper layer and hit delete, select none. now open gmendes_love-flowers_paper15 and c/p as a new layer right above your white background layer, resize by 18% andadd a mask of choice, I used a round mask. Now you can add a dropshadow of choice to all your elements, and add your tube of choice. on the Zindy tag I changed the blend mode to Luminance (L). this is your tag so it is your choice.I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Summer Fun! Tube of choice, I used artwork Elias Chatzoudis and Suzanne Woolcott Scrap used Funky Fresh by Cora's Creations Font of choice I used Anja Elaine Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)open cc-pp-01 c/p as a new layer and add a mask of choice, I used a round mask. now open cc-frame-03 c/p as a new layer, I resized mine by 80% smartsize, Open cc-flower-02 and c/p as a new layer, resize by 70% do the same with cc-flower01, You can use my tag as a guide or you can place the flowers where you want to. Open cc-dots and c/p as a new layer, placing just above the mask layer and below the frame layer, now image resize by 70% then image rotate free rotate to the left by 65%, move it up and to the left of the tag, now image duplicate and then flip that and then mirror it,placeing it towards the bottom right of your tag.. Now open cc-wing-heart and c/p as a new layer, bring this layer to the top, go image resize by 80% twice, and then image mirror and place towards the top right of your tag. now lets open cc-ribbon-05 and c/p as a new layer, move this towards the bottom right of your tag,now open cc-flower-05 and c/p as a new layer, image mirror and place this over towards the bottom left of your tag, I moved this layer below the ribbon layer, now lets open cc-wa-01 and c/p as a new layer, move it towards the bottom left of your tag, resize this by 80% twice. (On mine I added a gradient glow you can easily do this with dropshadow option in psp if you dont have eyecandy,) Now open cc-heart-03 and c/p as a new layer, (I placed this right above the frame and below the flower layers) image resize by now rotate this by 15% to the left and move it up towards the left top of the tag. Now open cc-pp-07 and c/p as a new layer above your dots and below your frame layer, grab your magic wand and click inside the circle of your frame, go selections modify expand by 5 then selections invert, go to the paper layer you just added and hit delete, leave selected so you can do the same with your tube (IF you want it inside the circle of the frame) If you want your tube sticking out like in my examples, paste your tube, grab your eraser and erase the bottom part of your tube select none, go to the tube layer and select all float defloat, grab your eraser again now this time we will erase the frame layer, the flowers etc, anything that is covering your tube pieces you want visiable "popping" out of the frame. select none, add a drop shadow of choice to all your elements, when you are happy with your tag, hide the white background layer and merge visable. I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Elias Girls Rock! Tube of choice, you will need 4 tubes from the same artist, I used artwork by Elias Chatzoudis and Suzanne Woolcott Template used x-clusively christy designs template 1 get it HERE Font of choice, I used BankGothic MT BT and AL Afternoon Delight Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! This is a VERY simple tut, but I hope you like it anyway! Open Template duplicate and close the original, go to copy of raster layer 4 and select all, float, defloat, selections invert, add a paper of choice, (or you can add a new layer and flood fill with a color that compliments your tube), now grab a tube and c/p as a new layer, hit delete on both the paper layer and the tube layer, select none, delete the original copy of raster layer 4. Do the same with the other 3 layer on the template, (On the Elias example I flood filled with black and used the effects blinds on each layer, On the woolcott version I used a paper) When you are satisfied with what you have hide your white background layer and merge visable. duplicate this layer and on the original go adjust, blur, gaussian blur 10. I added Blinds effect to this layer as well on the Elias version. Now add your wording of choice, I used Bankgothic mt bt on the Elias version and I used AL Afternoon Delight on the Woolcott version, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Just Day Dreaming Tube of choice, I used artwork Rion Vernon and Suzanne Woolcott Scrap used Fantasy Land By ScrappingMar which you can get HERE or HERE Font of choice, Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open FantasyLand_ScrappingMar(33) c/p as a new layer, image resize by 20% smartsize and move up and to the left of your work area, Now Open FantasyLand_ScrappingMar(49) c/p as a new layer and resize it by 70% and move it towards the bottom of your work area, Now open FantasyLand_ScrappingMar(48) c/p as a new layer and resize by 60% I moved mine over towards the left side of my tag in front of the fence. Now open FantasyLand_ScrappingMar(46) c/p as a new layer, and arrange this layer to where it is right above your white layer, resize by 40% and move it up towards your little village, Now open FantasyLand_ScrappingMar(66) c/p as a new layer resize it by 55% move it over towards the right side of your fence, I placed mine in front of the fence you can leave it behind your fence if you like (this is your tag) Now open FantasyLand_ScrappingMar(45) c/p as a new layer resize it by 25 % and place it in front of your tree trunk, I duplicated this a couple times and place a few along the fence line and a couple along the bench feet, I resized those (in front of the bench by 50%) Now open FantasyLand_ScrappingMar(60) c/p as a new layer resize by 50% and place it down towards the bottom of your tag, so it looks like your bench and fence is in the grass. Duplicate it and mirror it , I place these behind my fence area, now duplicate again and move it down a bit so it is in front of the fence layer and behind the bench layer, now duplicate and mirror this (you should have 4 layers that are grass) 2 layers are right above the white layer and 2 layers are above your fence layer, now lets open FantasyLand_ScrappingMar(58) c/p as a new layer and resize it by 35% . now lets open FantasyLand_ScrappingMar(4) c/p as a new layer right above your white background layer, resize this by 85% now add a mask of choice to this layer, I used a round mask, you can add more elements to your tag if you like I added one of the darling umbrellas' resizing it by 25% I also added the pretty little rainbox resizing it by 55% and placing this layer right above my mask layer, I added 2 of the little fairies resizing them by 10% and placing them near the little fantasy village, now you can add your tubes of choice and a drop shadow of choice, I did not use a drop shadow on the "grass/lawn" or the rainbow area's but I did put one on all other elements . when you are satisfied with all your placements etc, hide your white background layer and merge visiable, I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Hearts Afloat Tube of choice, I used artwork Suzanne Woolcott (in second example) Scrap used Funky Fresh by Cora's Creationz Font of choice, I used SwingSet BB Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work) Open cc-frame-01 and c/p as a new layer, resize it by 90% smartsize. Now open cc-girl and c/p as a new layer, I moved her over to the left hand side of my frame. resize by 90%. open cc-balloon-02 and c/p as a new layer, move this layer below your girl layer and put it behind her. I resized mine by 90% twice, now open cc-balloon-01 and repeat as above, I also mirrored this one. Now open cc-funky-tree and c/p as a new layer, move this layer below your frame layer, I resized mine by 77% and placed it over to the left side of my frame, now open cc-grass and c/p as a new layer, right above your tree layer, and below the frame layer (we will be erasing the bits outside of the frame in a bit lol) resize the grass by 50% now duplicate and mirror and line up the two grass layers so the blend together. (I made sure the two "ends" were behind the center of the frame) Now lets open cc-bee and c/p as a new layer, I resized mine by 20% place it where you want. I duplicated mine and then mirrored this layer. now open cc-pp-09 and c/p as a new layer right above your white layer, turn the opacity on this layer down to 50%. go to the frame layer, grab your magic wand and click inside each of the frame holes, once that is done go selections, modify by 5 and then selections invert. Now we will go to the tree layer and hit delete, then the 2 grass layers and hit delete and then to the paper layer and hit delete, select none. Lets open cc-heart-03 now c/p as a new layer above your white layer, I resized mine by 35% (using your raster deform tool) move it up to theright hand top of your tag, now duplicate this layer (again using your raster deform tool) move this down and to the left abit, so it looks like the hearts are blowing out of the tree. open cc-mushroom 1 and cc-mushroom-2 and c/p as new layers, below your grass layers, and arrange to your liking inside your frame I resized mine by 35%, now you can either add a drop shadow of choice to your elements etc, and hide your white background and merge visiable, and save your tag (add the correct copyright to the tag per Cora's TOU)

or you can also make a tag like my second example below, add a couple tubes to your "window scene". I always resize my finished tag BEFORE adding my copyright info, it makes this seem clearer, add your name and copy right information and Save the way you prefer to save tags, I hope you enjoyed this tut smiles christy Ü

Like Totally! Tube of choice, I used artwork by Suzanne Woolcott and Elias Chatzoudis Scrap used Totally (80's Blog Train) by Cora's Creations Template 14 by Babe's Designs Font of choice, I used Pea Sarahloo I used Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open Template 14 By Babe and duplicate close the original, Delete the copyright layer. go to the large circle layer and select all, float, defloat, (on some templates you have jaggady edges so what I do is this, go up to selections and modify smooth I put both boxes on 10 ) Now open cc-pp-08 and c/p as a new layer, selections invert and hit delete, select none, now delete the original big circle layer. Select rectangle 1 layer and repeat as above, I used cc-pp-09. Select rectangle 2 layer and repeat again, I used cc-pp-01.Go to the heart boarder layer now, select all, float, defloat, this time I smoothed by 2 (you will lose the shape of the heart if you go anymore than that) I used cc-pp-02 on this layer. Go to heart layer3, repeat again as above(smoothing by 10), I used cc-pp-02 on this layer. go to heart layer 2 repeat as above again, I used cc-pp-05 on this layer. go to heart layer1, repeat as above, I used cc-pp-07 on this layer. now select the circles layer, select all, float, defloat, selections modify, smooth by 10 in each box, selections invert,I used cc-pp-04. leave selected this time, selections invert and then modify contract by 14 hit delete, select none, go back to the circle layer, select all, float, defloat, modify contract by 3, selections invert, I used cc-pp-08 again, hit delete and select none, Now delete the circles layer. now go to the "frame" layer you made with cc-pp-04, I added an inner bevel to this layer using these settings now you can add a few elements to your tag, I used cc-glasses, resized by 48% smartsize, and then did a free rotate of 20% to the right. I used cc-wire also I placed this as a new layer above the white layer, I also used cc-sequins1 and cc-sequins2. I placed these above the wire layer and resized by 35% smartsize, placing one to the top left of my tag and the other towards the bottom right of my tag. Now open cc-safety-pin and paste as a new layer, arrange to your liking, I resized it by 35% and free rotated it to the left by 21% I also duplicated it a couple times, did a mirror and a flip on the layers, so there are a few laying together. I also used eye candy gradient glow on some of my layers, the rectangles, the hearts, the heart boarder, The big circle layer, again this is your choice, your tag, Now choose tubes that compliment your tag, and place them in your framed area, (this is your choice) you can do it like my second example if you prefer.Now add a drop shadow of choice to your elements,when satisfied with your tag, hide your white background layer and merge visiable, as always I resize my tag before adding my copyright layer so it stays clear. Add the copyright info and your name and save your tag to your prefrence. I hope you enjoyed this tut smiles christy Ü

Fantasy Flower Garden Tube of choice, I used artwork by Elias Chatzoudis and Suzanne Woolcott Scrap used Fantasy Land by Scrapping Mar HERE or HERE Font of choice, I used Chachi Graphic Program of choice, I use PSP 9 This tutorial assumes you have working knowledge of paint shop pro, All of my tutorials are my own creation and any similarity with any other tutorial is purely coincidential. Please do not copy my tutorials to anyplace, please link back to my blog! Open a new image 750x750 and flood fill white, ( you can ALWAYS resize later, I like having plenty of room to work)Open FantasyLand_ScrappingMar(6) element and c/p as a new layer, resize it by45% smartsize, do the same with FantasyLand_ScrappingMar(2) element and FantasyLand_ScrappingMar(3) element. Arrange them so they look like a small bunch of flowers, (use my tag as an example) Now Open FantasyLand_ScrappingMar(44) and c/p as a new layer, resize by 65% move it towards the bottom of your tag and the left, duplicate it and then image mirror, Line them up so it looks like my tag above, Now open FantasyLand_ScrappingMar(53) c/p as a new layer and resize it by 50% move this layer down below all layers (right above your white layer) and move it over so it is behind one of your flower frames so it looks like the stem of theframe. I duplicated this and then image mirror and then free rotate to the left by 12% so it looks like more leaves, stems to the other frames. Now open FantasyLand_ScrappingMar(4) c/p as a new layer right above your white layer and resize it by 90%. Add a mask of choice, I used a round mask. Now grab your magic wand and click inside one of your flower frames, go selections modify expand by 5 and copy and paste a tube of choice. go selections invert and hit delete, keep selected and choose a paper of choice from the kit that compliments the tube and c/p as a new layer hit delete, move these below the frame you are working on ONLY. Do this same thing for each of your flower frames, now add a drop shadow of choice to your tubes and frames. Now hide your white background layer and merge visiable. (I resize my tag before adding my copyright info because it stays sharper this way) Add the copyright info and your name and save your tag to your prefrence. I hope you enjoyed this tut smiles christy Ü

another example using Elias Chatzoudis tubes