My TOU and Some Info

I also sell Scrap Kits
Please take a moment
to stop by my Scrap
Blog as Well!!!
X-Clusively Christy Scraps
smiles
christy
Ü

Just a note about
my tuts I dont tell
all my secrets lol
like how I do the
glow on a name etc.
I also have no
control over the
FTU supplies
I am sorry but
sometimes the
kits are for a
limited time free
or just disappear,
I will share
masks etc ONLY
if the tou of
the creator allows,
You can easily find
another mask or kit
to use in place of
what I have used
on my tuts, I write tuts
as I create a tag,

I hope you all
enjoy them and
I thank you
so much for
taking the time
to stop by my blog
smiles
christy
Ü

Followers

I CT For

Proud Member

My License's

Suzanne Woolcott, TooshToosh, CILM, MPT, CDO, PTE, My Tag Art, My Tubed Art, Zindy Nielsen, PSP Tubes Emporium, Keith Garvey, PFD, I also enjoy FTU artist

Leave me a note

Blogs I follow

Search

Grab My Blinkies Here

Would love to see your creations

I would LOVE to see
your creations you
can always email me
HERE
with a link or a tag
smiles
christy
Ü

Who Has Stopped By?

Sunday, November 3, 2013

Looks Like Christmas!


Looks Like Christmas

Tube of choice, I used Elias Chatzoudis (Exclusive to Dangerouz Mindz Forum) and Rion Vernon
Scrap kit of choice, I used Joy by Pimp'd Desingz
Font of choice, I used Saliere
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-01 c/p as a new layer and apply a mask of choice
I used Vix_Mask8Christmas2010, merge group, now paste
pd13-pp-04 below that mask and apply another mask of
choice, I used Vix_MondayMask1 merge group, I stretched
this one out a bit so it shows outside the other mask layer,
now duplicate.

Now open pd13-frame-05 c/p as a new layer, grab your magic
wand and click inside the frame opening expand by 9 and invert
open pd13-pp-03 c/p as a new layer below the frame hit delete
and select none, open pd13-leaves-01 c/p as a new layer, below
the paper layer and resize by 58% rotate to the left by 36%,
duplicate and mirror, I duplicated it again and rotated it to the
left by 45% bring to the top duplicate and mirror, now open
pd13-flower-03 c/p as a new layer, resize by 84% arrange
above the frame layer, duplicate and mirror, I duplicated
again and this time placed it right above the leaves layer BELOW
the frame, duplicate and mirror, now open pd13-flower-04
c/p as a new layer right above the frame layer, resize by
80% and mirror, duplicate and mirror again, now open
pd13-candy-cane c/p as a new layer, above all the flower
layers, resize by 88% and rotate to the left by 12%
open pd13-ribbon-03 c/p as a new layer arrange below
your leaves layers and above the flowers layers, open
pd13-santa-hat c/p as a new layer, rotate to the right
by 13% and resize by 60% now open pd13-ribbon-04
c/p as a new layer, open pd13-button-01 c/p as a new
layer place in the center of the bow on the right, open
pd13-snowflake-02 c/p as a new layer and resize by 48%
rotate to the right by 21% and place in the center of the
button. open pd13-ornament c/p as a new layer, place
below the button layer and rotate to the left by 120%
now resize by 48% now open pd13-horn c/p as a new
layer, resize by 65% and place below the button layer
open pd13-gift-01 c/p as a new layer and resize by 65%
and mirror then rotate to the left by 26% arrange below
the leaves layer, now add a dropshadow and tube of choice
hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Image and video hosting by TinyPic

Autumn Spice



Autumn Spice

Tube of choice, I used Cris Ortega and Sugargrl14
Scrap kit of choice, I used Autumn Spice by Pimp'd Designz
Font of choice, I used Aphrodite Stylist
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-07 and c/p as a new layer duplicate
on the bottom layer apply Monti_blinds_mask 1
on the next layer apply SophisticatSimone_mask2
merge group

Now open pd13-frame-02 c/p as a new layer, resize
by 90% now grab your magic wand click inside the opening
and expand by 9% invert, open pd13-pp-06 c/p as a new
layer below the frame, resize by 68% and arrange to
your liking inside the frame, hit delete and select none.
open pd13-leaf-03 c/p as a new layer, arrange right above
the mask layers, rotate to the left by 26%, now open
pd13-leaf-02 c/p as a new layer below the leaves layer
now open pd13-leaf-04 c/p as a new layer, again this
is right above the mask layer,now open pd13-branch-01
c/p as a new layer, bring to the top and resize by 80%
open pd13-branch-02 c/p as a new layer, resize by
resize by 80%, open pd13-flower-02 c/p as a new layer
resize by 90% and rotate to the left by 90% open
pd13-flower-04 c/p as a new layer below the other
flower layer and resize by 90% open pd13-acorn-01
c/p as a new layer and bring to the top, resize by 90%
rotate to the right by 15% open pd13-acorn-02 c/p as
a new layer and resize by 90% now open pd13-leaf-01
c/p as a new layer arrange right above the frame layer
mirror and resize by 62% duplicate and rotate to the
left by 45% now duplicate and flip, open pd13-pinceones
c/p as a new layer, resize by 58% and mirror, arrange
below the acorns, open pd13-pumpkin-03 c/p as a new
layer, resize by 65% and place right above the flower
layers, open pd13-ribbon-03 c/p as a new layer, arrange
between the 2 branch layers and mirror. Now add a
dropshadow and tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Image and video hosting by TinyPic

Almost Autumn


Almost Autumn

Tube of choice, I used Pinuptoons and Zindy S.D. Nielsen
Scrap kit of choice, I used Almost Autumn by Designs by Sarah
Font of choice, I used Studio Lettering Swing
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open sb_pmt_almost-autumn_pp5 and c/p as a new layer
apply a mask of choice, I used lrmask144 (this is a photomask)

now open sb_pmt_almost-autumn_frame 1 c/p as a new layer
resize by 90% and rotate to the left by 8% now stretch your mask
out just a bit to show around the frame, grab your magic wand
click inside the frame opening and expand by 9 and invert open
sb_pmt_almost-autumn_pp2 c/p below the frame and hit delete
select none, now open sb_pmt_almost-autumn_leaves bundle c/p as a
new layer right above the mask, duplicate and flip, duplicate
again and mirror, now open sb_pmt_almost-autumn_leaves
c/p as a new layer, bring to the top and mirror now open
sb_pmt_almost-autumn_paper flower 3 c/p as a new layer
right above the frame layer, mirror now lets open
sb_pmt_almost-autumn_paper flower 4 c/p as a new layer
resize by 82% now open sb_pmt_almost-autumn_ribbon 2
c/p as a new layer right above the frame layer now open
sb_pmt_almost-autumn_swirl1 c/p as a new layer right
above the frame and rotate to the right by 18% now add
a dropshadow and a tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Image and video hosting by TinyPic

The Autumn Window


The Autumn Window

Tube of choice, I used Rion Vernon and Elias Chatzoudis
Scrap kit of choice, I used A County Autumn by Inzpired Creationz
Font of choice, I used A&S Snapper Script
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

Open paper 3 and c/p as a new layer, apply a mask of choice
I used DD_Fallmask 4 merge group

open scattered leaves and c/p as a new layer, now open
frame 4-Window and c/p as a new layer grab your magic
wand and click the openings and expand by 9 invert, and open
paper 2 c/p below the frame and hit delete, select none, move
the paper below the leaves scatter now open branch4 and
c/p as a new layer, bring to the top, resize by 80% and
rotate left by 15% open branches 1 and c/p as a new layer
arrange below the paper layer, mirror and rotate left by 30%
open flower 1 c/p as a new layer arrange right above the
frame resize by 80% open flower 9 and c/p as a new
layer below the other flower, duplicate, bring to the top
and resize by 72% open leaf 4 c/p as a new layer, resize
by 64% and place below the branch layer, duplicate and
rotate to the right by 36% duplicate and flip, and mirror
duplicate and flip again, now open leaf 1 c/p as a new layer
resize by 64% duplicate and flip arrange all to your liking, now
open pumpkin2 c/p as a new layer, resize by 64% open
squirrel and c/p as a new layer and resize by 65% now open
wheat 3 c/p as a new layer right above the branch layer
duplicate and flip, now add a dropshadow and tube of choice
hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Wednesday, October 23, 2013

Trick Or Treat


Trick Or Treat!

Tube of choice, I used Caron Vinson and Amy Matthews
Scrap kit of choice, I used parts from Sarah's, Pimp'd Desingz and Grunge and Glitter and Digital Indulgence's Trick or Treat FB blog train
This is only a freebie until Oct 31st 2013
Font of choice, I used Spinstee
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

Open DI-Paper2 c/p as a new layer and apply a mask of choice
I used WSL_Mask306 merge group. I rotated mine to the right by
21% open sb_pmt_Trick-or-Treat_pp10 c/p as a new layer below
that mask and apply another mask of choice this time I used
HorsePlay's Pasture Mask 19 I resized this up by 120%

Now open sb_pmt_Trick-or-Treat_frame 6 c/p as a new layer
resize by 75%. now grab your magic wand click inside the frame
opening and expand by 9, invert and open pd13-pp-04 c/p as a
new layer below the frame, hit delete, select none, now open
DI_Bat c/p as a new layer and resize by 33% and rotate to the
left by 15% and then mirror it, now open pd13-swirl-01 c/p as a
new layer, mirror arrange above the skull mask layer and resize
by 45 and rotate to the left by 90% I pasted it again and
resize again by 45 and placed on the left of the frame,
open DI_Pumpkin c/p as a new layer below the bat layer,
resize by 55% now open pd13-flair-02 c/p as a new layer
resize by 36% and rotate left by 21% now open treatbag
from GG part of the kit, resize by 36% place right above
the pumpkin layer and arrange to your liking, now open
sb_pmt_Trick-or-Treat_flower 1 c/p as a new layer and
resize by 58% arrange layer to right above the masks layers
now open bow2 from GG part c/p as a new layer, arrange
right above the frame layer, open flower 2 from GG's Part
and c/p with the other flower layer, resize by 85% now open
pd13-flower-02 c/p as a new layer arrange to right above the
orange flower layer, now add a dropshadow and a tube of choice
hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Sunday, October 20, 2013

Dark Night

Dark Night

Tube of choice, I used Rion Vernon and Elias Chatzoudis
Scrap kit of choice, I used Darkness Falls by Pimp'd Designz
Font of choice, I used Arthur Gothic
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-03 c/p as a new layer and apply a mask of choice
I used WynterMask153087 merge group, now open pd13-pp-08
c/p as a new and apply a round mask of choice, I used yezmask014

Open pd13-frame-03 c/p as a new layer move towards the left
and resize by 80% now grab your magic wand and click inside
the frame opening and expand by 9, invert and open pd13-pp-08
c/p as a new layer below the frame and hit delete, select none
now go to the round mask layer and using the raster deform tool
make it seem like it is just a bit bigger then the frame, now lets
open pd13-tombstone and c/p as a new layer,resize by 68%
open pd13-skull c/p as a new layer and resize by 40% now open
pd13-tree-01 c/p as a new layer right above the first mask layer
and mirror, now open pd13-raven c/p as a new layer and mirror
resize by 35% and place on one of the tree branches, now open
pd13-eye-02 c/p as a new layer, bring to the top and resize by
36% now open pd13-flower-06 c/p as a new layer below the tombstone
layer and rotate to the left by 90% and then resize by 42%
open pd13-light-02 c/p as a new layer, arrange right above the
frame layer and resize by 42% duplicate and mirror, arrange to
your liking. open pd13-feather c/p as a new layer, place below
the skull layer and resize by 40% open pd13-glass c/p as a new
layer right above the feather layer, resize by 40% now open
pd13-button-01 c/p as a new layer below the flower layer, mirror
and resize by 40% now open pd13-flower-05 c/p as a new layer
below the button layer and resize by 65% now add a dropshadow
and a tube of choice, hide the white background layer and merge
visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Saturday, October 19, 2013

Fall's Window



Fall's Window

Tube of choice, I used Rion Vernon and Caron Vinson
Scrap kit of choice, I used Harvest by Pimp'd Designz
Font of choice, I used Affair
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-01 c/p as a new layer and apply a mask of choice
I used WSL_Mask363 merge group

open pd13-frame-05 c/p as a new layer, grab your magic wand
and click inside each opening and expand by 9, invert and open
pd13-pp-06 c/p as a new layer below the frame, hit delete
select none, now open pd13-pumpkin-02 c/p as a new layer,
bring to the top, resize by 65% open pd13-pumpkin-01 c/p as
a new layer below the others and resize by 65% now open
pd13-branch-05 c/p as a new layer right above the frame
mirror and resize by 88% and rotate left by 12 open pd13-branch-04
c/p as a new layer below the other branch, resize by 80% paste
again and mirror, I duplicated all three branches and rotated
to the left by 90% placing them along the bottom edge of the
frame, open pd13-ribbon-04 c/p as a new layer arrange below
the pumpkins and mirror, open pd13-acorn-01 c/p as a new
layer bring to the top and resize by 40% now open pd13-acorn-02
c/p as a new layer and resize by 40% I duplicated both
and "scattered" them among the pumpkins, open pd13-leaf-twig
c/p as a new layer arrange below the pumpkins layer, and resize
by 40% rotate right by 21% duplicate and mirror tuck them
to your liking, open pd13-pinecone c/p as a new layer, resize by
42% and rotate right by 26% place behind the pumpkins duplicate
and mirror now open pd13-leaf-01 c/p as a new layer, resize by
40% place below the pinecone layer and then duplicate and mirror
rotate to the left by 26% now open pd13-leaf-03 c/p as a new
layer, resize by 40% rotate right by 26% arrange below the
leaf twig layers, I duplicated mine a couple times, and rotated
and flipped them. now add a dropshadow and a tube of choice
hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Alice's Tea Party


Alice's Tea Party

Tube of choice, I used PinkCandi and Suzanne Woolcott
(PinkCandi is a new artist that has some darling new tubes!)
Scrap kit of choice, I used We R All Mad by Pimp'd Desingz
Font of choice, I used Bibleiotheque
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-01 c/p as a new layer and apply a mask of choice
I used 211InsatiableDreams mask, merge group

Open pd13-frame-03 c/p as a new layer, resize by 85% rotate to
the right by 6 grab your magic wand and click inside the frame
opening and expand by 9 invert, open pd13-pp-10 c/p as a new
layer below the frame hit delete select none, now open pd13-swirl-03
c/p as a new layer, mirror and rotate to the left by 6 now open
pd13-teapot c/p as a new layer,resize by 75% open pd13-tea-bag
c/p as a new layer and resize by 40%, now open pd13-rabbit
c/p as a new layer open pd13-greens-03 c/p as a new layer
place right above the mask layer, resize by 45%, I duplicated,
mirrored, rotated mine a few times, arrange to your liking, now
open pd13-greens-02 c/p below the other greens, resize by
45% again duplicate flip mirror rotate to your liking, now open
pd13-coffee-cup c/p as a new layer, resize by 42% place below
the tea bag layer, open pd13-brad-01 c/p as a new layer,
resize by 42%, open pd13-bottle c/p as a new layer arrange
right above the teapot layer, open pd13-card-01 c/p as a new layer
arrange right above the frame layer, resize by 30% open pd13-card-02
c/p as a new layer, resize by 32% rotate to the right by 9%
open pd13-flower-01 c/p as a new layer, right above the mask
layer, peek it out on the right side of the frame, open pd13-flower-04
c/p as a new layer above the mask layer and peek out on the left
side of the frame, open pd13-flower-07 c/p as a new layer, above
the last flower layer and again peek out on the right of the frame
now open pd13-ribbon-04 c/p as a new layer right above the
frame layer, add a dropshadow and a tube of choice, hide the
white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Built Tough!


Built Tough!

Tube of choice, I used Elias Chatzoudis and Rion Vernon
Scrap kit of choice, I used My Hero by Pimp'd Designz
Font of choice, I used Sovba Regular
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-01 c/p as a new layer and apply a mask of choice
I used 220InsatiableDreams Mask, Merge group

open pd13-fence-01 c/p as a new layer, go back to your mask
layer using the magic wand click outside the mask, now go to the
fence layer and hit delete, select none.open pd13-frame-06 c/p
as a new layer, click inside the frame opening expand by 5 invert
open pd13-pp-05 c/p as a new layer below the frame, hit delete
select none, now open pd13-leaves-01 c/p as a new layer,right
above the fence layer, resize by 80% rotate right by 90% duplicate
and mirror, now paste again resize by 75% and flip, duplicate 2 times
and place along the bottom of the frame, open pd13-cloth-strips c/p
as a new layer, bring to the top resize by 75% open pd13-flower-04
c/p as a new layer resize by 75% open pd13-flower-01 c/p as a new
layer, place below the cloth strips layer, open pd13-flower-03 c/p as
a new layer resize by 75% open pd13-ribbon-03 c/p as a new layer
right above the frame layer, open pd13-ribbon-01 c/p as a new layer
rotate to the right by 5%. Open pd13-staple c/p as a new layer and
"staple" the paper flower with star to the cloth strips, now open
pd13-dog-tag-02 c/p as a new layer, below the cloth strips, resize
by 55% and rotate right by 21%, open pd13-chain-01 c/p as a
new layer below the light green flower layer, open pd13-button-01
c/p as a new layer, bring to the top, now pd13-star-01 c/p as a
new layer, resize by 55% rotate left by 21%  now open pd13-flower-02
c/p as a new layer above the leaves layer and place near the left of the
frame, now add a drop shadow and tube of choice, hide the white
background layer and merge visble

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Friday, October 18, 2013

Happiness is the Key



Happiness is Key

Tube of choice, I used Pinuptoons and Amy Matthews
Scrap kit of choice, I used Happiness is Free by Designs by Sarah
Font of choice, I used RamblerScript JF
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open sb_pmt_happiness-is-free-pp14 c/p as a new layer, apply a
mask of choice, I used chas13mask, merge group

now open sb_pmt_happiness-is-free-frame 3 c/p as a new
layer, now open sb_pmt_happiness-is-free-frame 2 c/p as a
new layer, mirror and resize by 85% grab your magic wand
click inside the frame and expand by 9 invert, now open
sb_pmt_happiness-is-free-pp12 c/p as a new layer below the
frame and hit invert, select none, open sb_pmt_happiness-is-free-string2
c/p as a new layer resize by 85%, bring to the top, now lets
open sb_pmt_happiness-is-free-bow 5 c/p as a new layer
arrange with the string. Now open sb_pmt_happiness-is-free-flower 1
c/p as a new layer above the black frame, arrange to your liking
open sb_pmt_happiness-is-free-flower 5 c/p as a new layer
with the other flower, resize by 72% place below the yellow
flower, open sb_pmt_happiness-is-free-beads c/p as a new
layer right above the frame layer, resize by 50% duplicate,
mirror and flip, open sb_pmt_happiness-is-free-leaf c/p as
a new layer below the flower layers and resize by 58%
and then rotate to the left by 15% now duplicate and
rotate to the right by 115% Now lets open
sb_pmt_happiness-is-free-heart key c/p as a new layer
place below the ribbon layer and resize by 41% now mirror
and rotate to the 60% duplicate and bring to the top, erase
enough to make it look "Looped" on the bow. now add a
dropshadow and tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


October


October

Tube of choice, I used Elias Chatzoudis and Caron Vinson
Scrap kit of choice, I used Boo-tiful by Pimp'd Desingz 
Font of choice, I used Babylonica
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-07 c/p as a new layer and apply a mask of choice
I used Blackwidow Mask, any good round mask will work.

now open pd13-frame-04 c/p as a new layer,resize by 60% rotate
to the left by 12% now open pd13-frame-02 c/p as a new layer,
rotate to the left by 12% then click inside opening and expand by
9 invert, open pd13-pp-02 c/p as a new layer hit delete, leave
selected and then open pd13-pp-10 c/p as a new layer below the
other paper, hit delete, now go to the striped paper and change the
blend mode to soft light (or play around until you find something you like)
now open pd13-print-01 c/p as a new layer, arrange to right above
the mask layer, resize by 130% duplicate and place one near the
top of the mask and one near the bottom, merge the two together
now select the mask layer, using magic wand click OUTSIDE the
mask layer and invert feather by 45% now invert and hit delete
on the print layer (until you are satisfied with the results) now
change the blend mode to hard light and turn down the opacity
to about 28%. Now open pd13-lightening c/p as a new layer
under the frame layer (erase what is outside the frame)
Change the blend mode to screen mode on this layer.
open pd13-leaf-02 c/p as a new layer, resize by 48% arrange
right above the star layer, I duplicated, flipped mirrored and
rotated this about 4 times, filling in the bottom
edge and right of the frame, do the same with pd13-leaf-01
now open pd13-ribbon-03 c/p as a new layer, arrange
to your liking, open pd13-ribbon-02 c/p as a new layer below
the other ribbon, open pd13-pumpkin-01 c/p as a new layer
resize by 48% now open pd13-flower-02 c/p as a new layer
right above the leaves layers, open pd13-flower-03 c/p as
a new layer, place right above the other flower layer,
now open pd13-button-01 c/p as a new layer right above
the flower layers, now add a dropshadow and tube or tubes
of choice (or a picture of choice) hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


A Witches Night


A Witches Night

Tube of choice, I used Elias Chatzoudis and TooshToosh
Scrap kit of choice, I used Witch Me by Pimp'd Designz
Font of choice, I used Spinstee
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd12-pp-02 c/p as a new layer and apply a mask of choice
I used AlexadraMask001-CM

now open pd12-window c/p as a new layer, arrange to your liking
open pd12-frame-01 c/p as a new layer below the window
rotate to the left by 90% and resize by 85% now open pd12-frame-03
c/p as a new layer and rotate left by 9 grab your magic wand and click
inside the frame opening, expand by 9 and invert, open pd12-pp-08
c/p as a new layer below the frame and hit delete, select none.
open pd12-leaves c/p as a new layer, arrange below the heart frame
and paper layer, resize by 85% I duplicated and flipped and then mirrored
mine I then duplicated again and rotated to the right by 18%, now open
pd12-flower-01 c/p as a new layer arrange right above the leaves
layer and resize by 80%, open pd12-flower-03 c/p as a new layer
below the other flower layer, open pd12-flower-02 c/p as a new layer
below the other flowers, now open pd12-beads c/p as a new layer
arrange right above the flowers layers, open pd12-ribbon-01 c/p
as a new layer, bring to the top and rotate to the left by 7% open
pd12-cat and c/p as a new layer arrange to your liking, I resized
mine by and placed it right above the window layer, now add
a dropshadow and tube of choice, hide the white background layer and
merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Zombie Grrrrl



Zombie Grrrrl

Tube of choice, I used Amy Matthews and Pinuptoons
Scrap kit of choice, I used Zombie Grrrl by Pimp'd Designz
Font of choice, I used Thriller
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image.

open pd-pp-02 c/p as a new layer and apply a mask of choice,
I used InsatiableDreams_mask486 I cleaned up a bit around
the mask using my lasso tool and a feather of about 24

now open pd-moon and c/p as a new layer, arrange to your
liking, resize by 80%, now open pd-frame-03 resize by 80%
grab your magic wand and click inside the opening, expand
by 9 and invert, open pd-pp-10 c/p as a new layer below
the frame and hit delete select none. open pd-tree and c/p
as a new layer arrange right above the moon layer, resize
by 65% and mirror place in front of the moon, now open
pd-ribbon-02 c/p as a new layer, flip and mirror, now open
pd-ribbon-03 c/p as a new layer, resize by 75% two times
open pd-print-01 c/p as a new layer arrange right above
the frame layer, now open pd-flower-02 c/p as a new layer
and resize by 75% arrange below the ribbon layer now open
pd-flower-03 c/p as a new layer, I colorized mine by changing
the hue and saturation to 0-0 then used the manual color
correction tool to match the paper background I used in
the frame, now add a dropshadow of choice, I tried to
match the one on the black and white ribbon, and a tube
of choice, hide the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Wednesday, October 9, 2013

Spider Woman



Spider Woman

Tube of choice, I used Asli Yeniay Kizilay and Elias Chatzoudis
Scrap kit of choice, I used Lost Soul by Pimp'd Designz
Font of choice, I used Zombie Holocaust
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd-pp-06 c/p as a new layer and apply a mask of choice
I used Nicole-CMCgrunge3

open pd-fence and c/p as a new layer, resize by 90% now open
pd-frame-01 c/p as a new layer, resize by 80% now open pd-frame-04
c/p as a new layer, rotate to the right by 90%
grab your magic wand and click inside the frame and expand by 9
invert and open pd-pp-09 c/p as a new layer below the frame
and hit delete. select none. open pd-barb-wire and c/p as a new
layer, rotate to the right and place along the edge of the frame
I moved mine in just a bit so you can see the barbs'. Now open
pd-mesh-01 c/p as a new layer, place this right above the fence
layer, open pd-mesh-02 c/p as a new layer place with the other
mesh layer, open pd-flower-02 c/p as a new layer, place right above
the mesh layers, I duplicated mine and brought this one to the top,
resize by 65% now open pd-flower-01 c/p as a new layer and
resize by 65% place below the black flower, now open pd-spider-web
c/p as a new layer right above the black frame layer, now open pd-staple
c/p as a new layer above the barb wire layer, rotate to the right by
18%, open pd-ribbon-01 c/p as a new layer below the staple layer
now open pd-spider c/p as a new layer and resize by 65% two times
I duplicated and mirrored mine, now add a tube of choice and a drop
shadow of choice, Hide the white background layer and merge visible

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü


Wednesday, October 2, 2013

Haunted


Haunted

Tube of choice, I used Zindy S.D. Nielsen and Caron Vinson
Scrap kit of choice, I used Haunting
(an October 2013 FB freebie by Word Art World)
Font of choice, I used Carpenter Script
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open waw_haunting_paper10 resize by 750x750
and c/p as a new layer, apply a mask of choice
I used Vix_BigMask001 merge group

Now open waw_haunting_blackstringframe and c/p
as a new layer, resize by 30% now grab your
magic wand and click inside the frame opening
expand by 7 and invert open waw_haunting_paper3
resize by 750x750 and c/p as a new layer below
the frame hit delete and select none, now open
waw_haunting_tree silhouette c/p as a new layer
place above the mask layer and resize by 18%
now open waw_haunting_leaves c/p as a new
layer and resize by 21% and then mirror now
rotate to the left by 30%  paste again and resize
the same now rotate to the right by 46% now
open waw_haunting_blackricrac c/p as a new layer
rotate to the right by 90% and then resize by
21% open waw_haunting_black flower2 c/p as
a new layer and resize by 21% I duplicated 2 times
and placed one below the frame and fill layer,
now open waw_haunting_flower orange c/p as
a new layer resize by 23% I duplicated it and
placed one below the frame and fill layer as well
now open waw_haunting_black gingham bow
c/p as a new layer and resize by 42% now
mirror and then rotate to the left by 90%
open waw_haunting_white button c/p as a
new layer and resize by 26% and rotate to
the left by 12. Open waw_haunting_boo c/p
as a new layer and resize by 18% arrange to
right above the ric rac layer, now add a drop
shadow and a tube of choice, hide the white
background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Tuesday, October 1, 2013

Halloween Princess




Halloween Princess

Tube of choice, I used Elias Chatzoudis and Caron Vinson
Scrap kit of choice, I used Princess Scaredy Pants by Pimp'd Desingz
Font of choice, I used Arlekino
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro,
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-08 c/p as a new layer and apply a mask of choice
I used a mask I have called edge11 (have NO idea where it came
from or who to credit) merge visible, now open pd13-pp-05
c/p as a new layer and apply another mask of choice, on this
one I used Montiblinds_2 merge group, now using raster deform
tool stretch it to your liking so both mask show a bit.

now open pd13-frame-02 c/p as a new layer, now grab your
magic wand and click inside the frame opening and expand
by 9 invert and open pd13-pp-01 c/p as a new layer and
resize by 68% and move it over so the web shows, hit delete
and select none, now open pd13-ribbon-05 c/p as a new layer
and arrange towards the bottom, I duplicated mine and then
rotated to the right by 9 now open pd13-ribbon-02 c/p as a
new layer mirror and rotate left by 9 now open pd13-moon
c/p as a new layer arrange above the top mask layer,
now open pd13-flower-03 and c/p right above the moon
layer, now open pd13-flower-02 and c/p right above the
other flower,now open pd13-flower-05 c/p above the frame
layer and resize by 68% now open pd13-candy-corn and c/p
as a new layer, resize by 36% and place below the ribbon layer
and rotate to the left by 12 now open pd13-candy-01 c/p as a
new layer and resize by 36% place below the candycorn layer
and rotate to the right by 12, now open pd13-candy-03 and c/p
as a new layer, resize by 36% and place below the other candy
layers, rotate to the left by 36% now open pd13-ribbon-03
c/p as a new layer and bring to the top rotate to the left by
12% and place on the other ribbon center. Now open pd13-sucker-01
and c/p as a new layer right above the frame layer, resize by
70% and rotate to the left by 5, now open pd13-wand c/p
as a new layer and resize by 70% and rotate left by 5.
now add a drop shadow and a tube of choice, hide the white
background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Monday, September 30, 2013

The Witches Cat




The Witches Cat

Tube of choice, I used Zindy S.D. Nielsen and Caron Vinson
Scrap kit of choice, I used Black Cat Night by Pimp'd Desingz
Font of choice, I used A&S Tuscano Script
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd13-pp-01 and c/p as a new layer, apply a mask of choice
I used 543InsatiableDreams Mask

now open pd13-frame-04 c/p as a new layer, resize by 90% and
rotate to the left by 6% grab your magic wand and click inside
the frame, expand by 9 and invert, open pd13-pp-02 c/p below
the frame and hit delete, select none, now open pd13-frame-03
resize by 65% and rotate to the right by 6, select the opening and
expand by 9 and invert, add the same paper as above, now open
pd13-wa-02 c/p as a new layer and rotate left by 6 and place at the
top of the first frame(like a plaque) now open pd13-ribbon-03 c/p
as a new layer, arrange below the locket frame and paper, rotate
left by 6 now open pd13-leaf-01 c/p as a new layer, place behind
the locket frame and paper layer and resize by 52% I duplicated
mine a couple times, rotating them I did the same with pd13-leaf-02
I also pasted a few below the bottom frame, you want a nice
fill of leaves. now open pd13-lable-04 c/p as a new layer, arrange
this to below the locket frame and rotate to the left by 26% and
then resize by 65% now open pd13-tickets c/p as a new layer and
resize by 50% and place below the lable. now open pd13-flower-01
c/p as a new layer, place below the ticket layer and resize by 65%
open pd13-flower-04 c/p as a new layer and resize by 76% arrange
with your other flower, now open pd13-cat c/p as a new layer bring
to the top and resize by 80% rotate to the right by 2 now open
pd13-spiderweb and c/p as a new layer inside the big frame layer
resize by 50% and then rotate to the left by 6 Now add your
tube or tubes of choice, and a dropshadow of choice, hide the
white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü



Sunday, September 29, 2013

Something Wicked this Way Comes


Something Wicked this Way Comes

Tube of choice, I used Elias Chatzoudis and Jonathan Raya
Scrap kit of choice, I used Wicked by Pimp'd Designz
Font of choice, I used JFWildWood
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd12-pp-08 and c/p as a new layer, apply a mask of choice
I used 457InsatiableDreams Mask

Now open pd12-frame-01 c/p as a new layer, resize by 90% grab
your magic wand and click inside the frame opening expand by 7
and invert, open pd12-pp-10 c/p below the frame and hit delete
select none, now open pd12-frame-03 c/p as a new layer, rotate
to the left by 6 and then grab your magic wand and click inside
the frame openings, expand by 9 and invert, open pd12-pp-06
c/p below the frame and hit delete, select none, now lets open
pd12-moon c/p as a new layer below the paper you just added
resize by 55% now open pd12-bat c/p as a new layer and resize
by 55% and rotate to the left by 10 now open pd12-flower-02 c/p
as a new layer and arrange to below the bat layer, now lets open
pd12-flower-04 c/p as a new layer and place below the other
flower, resize by 80%, now open pd12-flower-01 and c/p as
a new layer,Place this right above your mask layer but arrange
near the other flowers, now open pd12-ribbon-03 c/p as a new
layer and rotate to the left by 6 place along the top edge of your
frame. now open pd12-sparkle c/p as a new layer right above
the paper fill layer, rotate to the left by 6 I duplicated mine and
moved one a bit to the right and one a bit to the left, delete any
that shows outside the frame. now open pd12-web c/p right above
your mask layer, I resized mine up by 120% two times, now grab
your magic wand and select OUTSIDE the mask, go to the web
layer and hit delete, select none, now open pd12-tree c/p as
a new layer above the web layer, place to your liking, now open
pd12-spider and c/p as a new layer, resize by 30% and then
duplicate, arrange them to your liking, now open pd12-pumpkin
and c/p as a new layer, resize by 60% place below the spider
layer, now add a dropshadow and tube or tubes of choice, hide
the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Horror Movie Night

 

Horror Movie Night

Tube of choice, I used Scott Blair and Sulev Daekazu
Scrap kit of choice, I used Horror Flick by Pimp'd Desingz
Font of choice, I used Arthur Gothic
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open pd-pp-03 c/p as a new layer and apply a mask of choice
I used WSL_Mask84

now open pd-frame-03 c/p as a new layer, in my first example
the tube I used had a background, in my second example I used
pd-pp-02 in the frame opening. I also brightened it just a tiny bit so
it would give the illusion of a tv screen. Now open pd-popcorn2 c/p as a new
layer and resize by 55% now open pd-popcorn c/p as a new layer
and resize by 35%, I duplicated and mirrored mine, arrange to your
liking, now open pd-frame1 c/p as a new layer, grab your magic wand
and click inside the top frame opening, expand by 6 and invert now
open pd-vintage-poster-01 resize by 51% and place behind the opening
hit delete and select none, now select opening 2 on the frame, doing
the same as above, open pd-vintage-poster-02 resize by 50% and
hit delete, do the same for the bottom frame opening, using the
pd-vintage-poster-03 arrange each to show what you want of each poster
now add a dropshadow to the frame and then merge just the film frame
and the posters together, resize this by 68% now rotate to the right
by 9 now open pd-spider and c/p as a new layer, resize by 52%
I duplicated mine and mirrored it, placing one near the popcorn
and one near the top right of the frames. now open pd-voodoo
and c/p as a new layer, resize by 50% and place near your film
frame, one example 2 I also added pd-blood to my tag, (since I
used a True Blood Tube lol) now add a dropshadow and tube of
choice, (you do not need to dropshadow the film frame) hide
the white background layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü

Friday, September 27, 2013

Just a note


Well I got my fonts to look the way I want, and as you can see my signature tag is
in this post, but it doesn't show in any of my earlier posts, UGH lol
oh well besides this little issue which I will keep trying to work on I think I am happy with my new Halloween Blog Look
smiles
christy




Monday, September 23, 2013

Flight School




Flight School

Tube of choice, I used Suzanne Woolcott
Scrap kit of choice, I used Flight School by NitWit
Font of choice, I used A&S Snapper script
Graphic Program of choice, I use PSP 9
My first example is animated I hardly do animated
tuts due to I can NEVER get the optimization the way
that I want or forget to do a white background

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image

open bg_starred_maryfran and resize by 750x750
c/p as a new layer and apply a mask of choice, I used
sg_braided-star. any Christmas'y mask will work

now open frame_3_maryfran c/p as a new layer and
resize by 26% grab your magicwand and click inside
the frame opening and expand by 9 and then invert
open bg_white_maryfran and resize by 750x750 and
c/p as a new layer hit delete and select none, now open
snowband_maryfran and c/p as a new layer, resize by
28% and place at the bottom of your frame, I took
my rectangle selection tool and selected and deleted
the part of the mask that was showing below the snowbank
now open reindeer_4_maryfran and c/p as a new layer
resize by 20% and place to your liking, now lets open
tree_1_maryfran and c/p as a new layer, place below
the snowbank layer and resize by 20% and place on
the right side of the frame, open reindeer_2_maryfran
and c/p as a new layer, bring to the top and resize by
20% now open flightschool_maryfran and c/p as a new
layer inside the frame, resize by 20% and delete any
that is sticking outside the frame, add a dropshadow
and a tube of choice, you can animate it like my first
example or not. Hide the white background layer and
merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü
Friday, September 20, 2013

Halloween Witch


Halloween Witch

Tube of choice, I used Zindy S.D. Nielsen and Rion Vernon
Scrap kit of choice, I used Halloween by X-Clusively Christy Scraps
Font of choice, I used Cherish
Graphic Program of choice, I use PSP 9

This tutorial assumes you have working knowledge of paint shop pro, 
All of my tutorials are my own creation and any similarity
with any other tutorial is purely coincidential.
Please do not copy my tutorials to anyplace, please link back to my blog!

Open a new image 750x750 and flood fill white,
I Like to have room to work, this is your choice,
My tuts are written using this size image
I always use the full size kit if it is avaliable.

Open paper 12 and resize by 750x750 smartsize and c/p as
a new layer, apply a mask of choice, I used WSL_Mask353
merge group.

Now open frame3 and c/p as a new layer, resize by 60%
and rotate to the right by 6, grab your magic wand and click
inside the frame opening, and expand by 9 and invert, open
paper5 resize by 750x750 and c/p as a new layer below the
frame and hit delete, select none, now open bloodmoon
and c/p as a new layer, arrange to right above the mask layer
and resize by 40% move it up towards the right a bit, now
open the bat and c/p as a new layer, bring this to the top
and resize by 28% and then rotate to the left by 11
place towards the moon, now open the twig and c/p as
a new layer, resize by 44% and arrange to your liking, open
greenery1 c/p as a new layer again place this right above your
mask layer, resize by 42% mirror and flip, open greenery3
c/p as a new layer and rotate to the right by 72% and then
resize by 68%, now open leaves and c/p as a new layer
bring to the top and resize by 38% and then rotate to the
left by 90% now open ribbon2 and c/p as a new layer
place this right above the frame layer and resize by 38%
and then rotate to the left by 9, now open ricrac1 c/p as
a new layer and resize by 48%, now open leaf4 c/p as a
new layer and resize by 25% place under your leaves layer
I duplicated, flipped and mirrored mine,open leaf1 and c/p
as a new layer, place below your duplicated leaf layers, and
resize by 30% and mirror, rotate right by 21% duplicate and
flip, duplicate and mirror and flip again, now open the spider
c/p as a new layer and resize by 24% place to your liking,
open the skull and c/p as a new layer, resize by 30% open
the spellbook and c/p as a new layer below the skull and
resize by 35% mirror and rotate to the right by 21 now add
a dropshadow and tube of choice, hide the white background
layer and merge visible.

I always resize my finished tag BEFORE adding my copyright info,
it makes this seem clearer, add your name and copy right
information and Save the way you prefer to save tags,

I hope you enjoyed this tut
smiles
christy
Ü